Quantcast
Jump to content

Recommended Posts

Posted

Looking for Suzuki ATV VIN (Vehicle Identification Number) Number Decoders? Once you find your ATV VIN number off the tag on your Suzuki ATV, you can go to all kinds of websites that have VIN Decoders available. The best ones are backed by the Suzuki ATV manufacturer, however there are plenty of aftermarket Suzuki ATV VIN Decoder websites on the web. This topic will stay pinned and if you find any to add, please do it with a reply. 

eManualonline.com Save 20% OFF on orders over $50, Use Code: BLAZE

The following Suzuki ATV VIN Decoder websites are available where you can just enter your VIN number and it will shows you some of your ATV model details:

CycleVin.com - Use Our Off-Road Vehicle Search to look up ATVs and more!

 

  • 11 months later...
  • 2 months later...
  • 8 months later...
  • 11 months later...
Posted

What about 11-digit VIN numbers? Any info on those?

 

I just got my first Suzuki LT-F4WD, and I don't even know what year it is exactly. Looking at google pics, I'm guessing it's a 1990 model by comparing all the decals.

  • 6 months later...
Posted

For those interested, or having trouble with those sites.. Here's the suzuki specific criteria.. most of which is applicable to all makes though..

It has one mistake in it.. At one point in the explanation it says the check digit applies to the digits before the check digit, that's not right. The check digit checks all the digits, including the check digit..

 

The Vehicle Identification Number (VIN) is composed of 17 characters. The standard was originally defined in ISO Standard 3779 in February of 1977. Then it was revised in 1983. The ISO VIN is designed to identify motor vehicles of all kinds: cars, trucks, buses, motorcycles etc.

The Vehicle Identification Number (VIN) contains three major sections:
WMI - World Manufacturer Identifier (1,2,3 characters in VIN structure) If the manufacturer builds less than 500 vehicles per year than the third digit is "9". The WMI is described in detail in ISO 3780.
VDS - Vehicle Description Section. It contains 6 characters (4th to 9th positions in VIN) and defines vehicle attributes specified by manufacturer.
VIS - Vehicle Identifier Section. The last 8 characters of VIN define Year, manufacturer plant and serial (sequential) number of the vehicle.
The last four characters shall be numeric. The 10th position of the Vehicle Identification Number is a YEAR CODE.

ISO recommends that in VIN code capital letters A to Z and numbers 1 to 0 may be used, excluding I,O and Q in order to avoid mistakes of misread. No signs and spaces are allowed in Vehicle Identification Number code.
***********************************************

Recap with examples:

Digits 1,2,3 are World, Manufacturer, Identifier
Digits 4,5,6,7,8 are Vehicle descriptor Section -- *Somewhat variable based on manufacturer.
Digit 9 is the check digit
Digit 10 is the Year code
Digit 11 is the Factory code
Digits 12,13,14,15,16,17 are the Vehicle Identification Sequence


Let's see how this splits:

 

First digit - Country code
U.S.A.(1 or 4), Canada (2), Mexico (3), Japan (J), Korea (K), England (S), Germany (W), Italy (Z)

Second digit - Manufacturer
Audi (A), BMW (B), Buick (4), Cadillac (6), Chevrolet (1), Chrysler (C), Dodge (B), Ford (F), GM Canada (7), General Motors (G), Honda (H), Jaguar (A), Lincoln (L), Mercedes Benz (D), Mercury (M), Nissan (N), Oldsmobile (3), Pontiac (2 or 5), Plymouth (P), Saturn (8 ), Toyota (T), Volvo (V), Suzuki (S), Kawasaki (K).

Third digit - Identifier
Motorcycle (1), ATV (A) Kawasaki and Suzuki seem to follow this anyway

Fourth digit - Vehicle category
Data here is Suzuki specific, haven't found info for other brands.
ATV (A), Scooter (C), Business model or commuter (B), Single cylinder sport/street (N), Multiple cylinder sport/street (G), Family (F), Off road (S), V-Type engine, street, V2/V4/V6/8,... (V), Square Four (H)

Fifth digit - Engine Displacement
Data here is Suzuki specific, haven't found info for other brands.
A=49cc and less
B=50-69cc
C=70-79cc
D=80-89cc
E=90-99cc
F=100-124cc
G=125-149cc
H=150-199cc
J=200-249cc
K=250-399cc
M=400-499cc
N=500-599cc
P=600-699cc
R=700-749cc
S=750-849cc
T=850-999cc
U=1000-1099cc
V=1100-1199cc
W=1200-1299cc
Y=1400-1499cc
Z=1500 & up

Sixth digit - Engine Type
Data here is Suzuki specific, haven't found info for other brands.
1=2 stroke single
2=2 stroke twin
3=2 stroke triple or four
4=4 stroke single
5=4 stroke twin
6=?
7=4 stroke four

Seventh digit
Data here is Suzuki specific, haven't found info for other brands.
Design sequence or model version first version uses 1 then second version uses 2 etc... the tenth version would then be identified by the letter A then B etc..

Eigth digit
Data here is Suzuki specific, haven't found info for other brands.
First version uses 1 then second version uses 2 etc... the tenth version would then be identified by the letter A then B etc...

Ninth digit - Check digit
The ninth vehicle identification number digit is a VIN accuracy check digit, verifying the previous VIN numbers. This is how the check digit works


STEP 1
Assign to each number in the VIN its actual mathematical value and assign to each letter the value specified for it in the following chart:
ASSIGNED VALUES:
A=1 G=7 P=7 X=7
B=2 H=8 R=9 Y=8
C=3 J=1 S=2 Z=9
D=4 K=2 T=3
E=5 M=3 U=4
F=6 N=4 V=5


STEP 2
Multiply the assigned value for each character in the VIN by the position weight factor specified in the following chart:
VIN POSITION AND WEIGHT FACTOR:
1st = 8 10th = 9
2nd = 7 11th = 8
3rd = 6 12th = 7
4th = 5 13th = 6
5th = 4 14th = 5
6th = 3 15th = 4
7th = 2 16th = 3
8th = 10 17th = 2
9th = check digit

STEP 3
Add the products from steps 1 and 2 and divide the total by 11.

STEP 4
The numerical remainder is the check digit which would appear in the 9th position in the VIN. If the remainder is 10, then the letter "X" is used for the check digit.


Tenth digit - Year Code
80(A), 81(B), 82(C), 83(D), 84(E),
85(F), 86(G), 87(H), 88(J), 89(K),
90(L), 91(M), 92(N), 93(P), 94(R),
95(S), 96(T), 97(V), 98(W), 99(X),
00(Y), 01(1), 02(2), 03(3), 04(4),
05(5), 06(6), 07(7), 08(8 ), 09(9),10(A), 11(B), 12(C), etc.

Eleventh digit - Factory Code
Manufacturer code for what plant it was built in

Twelfth to Seventeenth digits - Serial Number

On 12/4/2021 at 3:26 AM, Paul4x4 said:

What about 11-digit VIN numbers? Any info on those?

 

I just got my first Suzuki LT-F4WD, and I don't even know what year it is exactly. Looking at google pics, I'm guessing it's a 1990 model by comparing all the decals.

Your vin number will be on a steel plate welded to the left rear down tube I think.. real obvious..

  • Like 3
  • 2 weeks later...
Posted (edited)
On 6/8/2022 at 8:42 AM, Mech said:

 

Your vin number will be on a steel plate welded to the left rear down tube I think.. real obvious..

Yeah, the location is real obvious, but the VIN itself is cryptic. Feel free to decode, if it's so simple to you! Thanks!

VIN.thumb.jpg.1428641f13a95bce628cf0c09dbdf14a.jpg

Edited by Paul4x4
  • Like 1
Posted

That Paul, is a model and frame number, not a vin. A vin number has seventeen digits.

You may have a vin plate, made of aluminum, riveted to the steering head perhaps. It might be riveted on somewhere else, or it may not have one if it's really old.

Your model appears online and the model is always preceded by JSA. So your vin(if your bike was issued one) should start JSA, then AJ45A.

According to a vin breakdown that prefix would mean, made in Japan, by Suzuki, and an AVT. And your model.. A means ATV, J means 200-249cc, 4 mean four stroke single, 5 means the fifth model version, and the last A means tenth version or variation.

  • 3 months later...
Posted
On 12/3/2021 at 8:26 AM, Paul4x4 said:

What about 11-digit VIN numbers? Any info on those?

 

I just got my first Suzuki LT-F4WD, and I don't even know what year it is exactly. Looking at google pics, I'm guessing it's a 1990 model by comparing all the decals.

I just did a free faxvin for my LT-F4wds and it came right up.  mine is a 1995

https://www.faxvin.com/vin-check

  • 2 months later...
  • 2 months later...
Posted

Thank you for the manual VIN decode! I couldn't figure out the first digit of my VIN due to scratches on the frame so none of the automatic VIN decoders worked. Using the check digit, I was able to figure it out! Now I know my quad is a 2001 King Quad 300 LT-F300 made in Japan.

  • 2 months later...
  • 8 months later...
  • 6 months later...
Posted

This may help in decoding the Vin#

 

ATV UTV VIN Decoding / Breakdown by characters

How to decipher your ATV - UTV VIN. Decode each character in your VIN.


                                            Year Code Table

Capture_VIN_CHART_a23c080c-0c57-4103-b19

                                   The breakdown by Character

Capture_breakdown_2_large.PNG?v=15508534

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Popular Now

  • Similar Forum Topics

    • By mehim
      Hi everyone and thanks for reading. 
      My husband and me are getting ready to host the 2nd Quad Runners event at our nudist campground. The first one (last year) went pretty well with about 20 quads attending and have to say, it was a smaller group, but they made up for their size with the large interest in partying and there was plenty of nudity as the Saturday night went on. 
      We have decided to host another one this summer, but we are looking for some fun (but safe) riding events. Our grounds are almost all flat and remember we are a nudist campground so many of us are bare as* naked so "slow ride" events would be the best. 
      Give us your thoughts and ideas and feel free to ask us anything you would like, and we will answer right here in the thread. 
      Thanks for your help and ride safe. 
      BTW, let us know what "anything goes" means for this thread section. 

    • By Mikey509
      Hi guys, I was given a 2000 Honda Recon fourtrax 250 (I think that's the full name lol). The previous owner had it sitting for a while before I got it. It sat for another few years in my ownership. I got it up and going on its first test drive today!! I was wondering where everyone buys their parts from?  Coming from the car community, we have sites like RockAuto and many more. Anything like that for quads? Also would like to be pointed in a direction, if possible, for plastics. I am missing a few and would like to have it complete. I appreciate any input!
    • By bradleyheathhays
      Unfortunately it looks like I have some people in my new neighborhood paying a little too much attention to my auto and for the first time I'm feeling a need to add some security system(s) to old yeller.  I think just a basic remote arm system would do, not interested at all in remote start or unlock.  I'm not familiar with modern alarm systems, but here's what I 'think' I need...
      - Door switches for all 5 doors (rear hatch).  Probably a PITA to install but that's only an initial idea.
      - 'Bump' alarm (not sure what it would be called) for if a window breaks or if something is jarred
      - Geo-location function like a low track or something similar
      Additionally I'd like to install possibly 2 start kill switches.  I'm not sure where inline these are normally installed but my impression is that directly in line with the key ignition switch would be common.  But then what if someone jumps the starter with a screwdriver...would this type of switch work in that instance?  So that leads me to the idea of a second ignition kill switch which would either be wired between the battery and starter motor, or between the starter motor and ground.
      And last...security lugs.
      So am I over thinking this here?  What's your recommendation for what I really need and maybe a good but economic alarm system that can get this done?                    
    • By LMI
      Hi all.  New to the forum & quads.  Seems like a great place full of info.
      I just recently picked up a 2005 Suzuki KingQuad LTA700.  I need a battery.  I've been reading up on conventional vs AGM types.  I have a Royal Distributing and Canadian Tire.  RD has 2 types avail for my year/Model a battery YTX16-BS CRANK $75, and BATTERY YTX20CH-BS YUASA $140.  Neither of these is the type from the manual FTZ16-BS.
      from what I can tell... I think the only difference is the capacity with the $75 unit rated at 14 AH/10HR and the $140 unit rated at 18 AH/10HR ... which is the rating in the manual for the FTZ16-BS.  How much does this make a difference for nearly x2 the cost?
      And about the models/type numbers.... what is important to know ... they all end in "-BS" but are the other details relevant or just manufacturer naming?
    • By kevinohio
      Does anyone have a copie of the owners/operators manual.the basic book that comes with the atv.i need the smaller one.i have the great big repair manual one.
×
×
  • Create New...