Quantcast
Jump to content

Honda Sportrax Hubs From Recon?

Hunter Aldridge

By Hunter Aldridge
in Honda ATV Forum

 Share

Recommended Posts

  • Ajmboy changed the title to Honda Sportrax Hubs From Recon?
JacobSlabach Mentor

JacobSlabach

Posted
Posted

the bolt pattern is the main issue- as far as I know, atv brands have the same bolt patterns among the models- so you couldnt take honda rims and put in on kawasaki....  But I would say yeah, go for it!  Worst case, you might have to buy some spacers to keep the rims from rubbing your brakes... dont know about that.

davefrombc Mentor

davefrombc

Posted
Posted

You'd have to  measure to be sure , but the hubs  may very well be interchangeable.  My guess is they most likely are if they are from similar  quad series. Hubs  from  a 250cc to  350cc bike in  either series are more likely to be a direct swap than  from a  250 and one with a much larger displacement.  More power would  call  for heavier axles  and hubs in most cases.

  • Like 3
  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Forum Topics

    • DexKing
      2004 Honda Recon 250 excessive valve chatter
      By DexKing
      I recently got my hands on a free 2004 Recon that the owner had zero information on the machine or the history. Long story short, a little troubleshooting and research revealed i needed to replace the timing chain for it to stay running. when i opened the case, it the chain was so horribly stretched, that the tensioner pivot arm had play between it and the chain! I also found the oil pump chain totally disconnected from the sprocket due to being completely worn out. I tore the whole engine down and rebuilt it from the bottom up finding little things here and there that needed to be replaced. Upon inspecting the top end, i didn't find any bad/excessive play in the crank, rod bearings or wrist pin. Now the machine runs great, but even after 2x adjusting the valves, the chatter is way more than you'd expect from a honda normally. My neighbor is an auto mechanic by trade, and i asked him to take a listen. the look on his face when i started it and it was chattering like that was priceless! He mentioned that maybe the valves themselves might be wore out or stretched. my question here: what all can cause the excessive rattle up in the valve cover aside from valves being out of spec? Everything else seemed to be in decent condition as far as rockers and guides go. I am fairly new to small engine/ATV repairs, but am learning as a hobby and have a fair amount of knowledge with how to do some wrenching. Thanks!
    • J-Dub
      2001 Recon dying
      By J-Dub
      2001 250 Recon randomly shuts off but will immediately fire back up . Any thoughts
    • Coyote251
      2001 250 Recon - Ring Gear Spacers
      By Coyote251
      Hello,
      Hoping someone can help me out. Just picked up a 2001 Recon for my son, got a good deal on it but the rear-end of the bike came in a box (pieces). I have gone through and inventoried what I have and what I need but I am not sure what size ring gear spacers I should get. I have a new pinion gear installed and a new ring gear to put in it, all of the other bearings and seals are replaced also. So since this should be pretty much like a new differential, I am thinking that "F" is the right size (1.56) based on the manual where it says this is the "standard" size. I am thinking that I need to start somewhere before I worry about measuring backlash.

      Any input or advice would be appreciated.
    • vwhobo
      Want to Buy - Used tires for 250 Recon
      By vwhobo
      Does anyone have a used set of tires for a '97 Honda Recon pretty close to Sumter, SC?  Not looking for anything new or expensive but they've gotta hold air and have some tread left.  Wheels not needed.  Sizes are 22x7x11 and 22x10x9.  Thanks.
    • Ironworker709
      Honda Recon plastics
      By Ironworker709
      Just a shot in the dark here..but...
      Does anyone have the red rear plastics for a 2000 honda recon in eastern Georgia areas?..
      We live in Millen area..it is in between Waynesboro and Statesboro
      My 17 year old grandson has somehow tore ours up and the battery pocket in it is even busted and the battery is hanging now
      Dont much care if it is faded or not..it will be getting rebuilt soon and we probably paint it anyhow

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...