Quantcast
Jump to content


Raptor 700 is no longer the king


Recommended Posts

The newest issue of QUAD (JUNE/July) they do a big-bore shootout. They compare the KTM 525, Raptor 700, Polaris 525IRS, Polaris 525SRA. The overall winner was the KTM. 2nd place but nowhere near the KTM was the Raptor. They even state that the money one would spend on the Raptor 700SE is only 1000 less than the KTM. With everything that KTM offers on there quad, one would be a fool not to go with KTM.

Link to comment
Share on other sites

I really like the KTM 525 myself, but I've been reading about engine issues with it. Take a look at the Can-Am DS 450.

I can't stand CAn am. It's mainly the attitude of the Can am owners. By the time I'm ready to buy it won't be a first year quad. They wiull have the bugs worked out. I use to own a KTM dirt bike. I love them, they make superior machines. They just have to work out the kinks.

Link to comment
Share on other sites

  • 2 weeks later...
  • 3 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Spritee1
      having an issue with the unit when running under a load up a hill or in high gear, seems like the belt is slipping, there is a clapping sound coming from the primary clutch like it releases and snaps back in. i don't think I should have a noise like that. this is a friends unit and he has already replaced the primary twice with the same result.
      not sure where to look next
    • By Johnfj44
      The stock driver seat cushion is separated at a seam. I took the seat apart and found that the material has torn and cannot be re-stiched. I'm trying to find a replacement seat. Any suggestions? Hoping for a used seat but couldn't find one on Ebay.
    • By HSTAR
      Hey I have a 1997 big bear 350 4x4
      I replaced the shifter shaft and the shift arm linkage and the rod when I installed them all I was unaware that you had to line the dot on the shifter shaft with the gap on the linkage arm gap put it all back  together and rode it I can't get it to shift in the right gears  I can move the shift cam by hand and goes in different gears but with the shifter shaft in it riding I can't put it in R or N 
      Anyone know how to line up the shifter shaft and the shift cam s
       
    • By Slitzer
      Hi,
      Got a Big Boss produced 2016 YM 2017 that gives DTC 520 285 2 (random)
      What I understand is correlation code for brakesensors, very little information in workshop manual.
      Removed front plastic to discover that no connector was mounted on the brake pressure switch!?
      The only "brake" information seems to come from the micro switch at the brake lever.
      Does anyone know if Polaris does anything special on the 6x6 or had this issue?
    • By NZrider
      My king quad 700 runs rough when cold then won't start some times but not often when it's hot. And occasionally smoke's a lot when it's cold I'm guessing that's rings but I'm worried unless it's causing the other problems
       
       
       
      All help is appreciated thanks
×
×
  • Create New...