Quantcast
Jump to content


A Few Exhaust Questions


Recommended Posts

I'm thinking about a new muffler for my AC 400, but I have a few questions...

1. Will it void my warranty?

2. Will I get a noticeable gain (torque, speed, etc)?

3. Will the pipe require me to re-jet or do anything else?

My choices are:

Muzzys

Super Trapp Mudslinger

Super Trapp IDSX

Link to comment
Share on other sites

You DO NOT have to rejet in every situation. I put an after-market pipe on my quad and did not change my jets. It runs fine. Only difference other than the performance gains was every now and then I get a little back fire. Like once a ride. If you put a pipe on and it is popping like crazy change it. You will know right away if you need to.

Link to comment
Share on other sites

You DO NOT have to rejet in every situation. I put an after-market pipe on my quad and did not change my jets. It runs fine. Only difference other than the performance gains was every now and then I get a little back fire. Like once a ride. If you put a pipe on and it is popping like crazy change it. You will know right away if you need to.

i would rejet anyway so u get a little more power from your wheeler

Link to comment
Share on other sites

rejetting is wen u take the jet that is inside ur carb and change it to a smaller jet stream or a bigger one.... now u do get better mpg and more hp..... but a problem with rejetting is that if u live in a region with different climates you have to change the jet for warm weather and cold weather.... it is a lot cheaper then the other kinda of mods out there but u also need to know wat ur getting urself into before u tear ur carb apart...

Link to comment
Share on other sites

You cannot REJET a Carb on the internet.....:laugh:

But....For any of you that have Questions......I found this for you.....Very Good Read

carb tuning

Personally,,,,,,When I change a Pipe.....From Stock to Aftermarket,,,OR,,,,Aftermarket to Aftermarket.....I do a Plug Chop to see where Im at....I let the Plug do all the talkin:wink:

Link to comment
Share on other sites

rejetting is wen u take the jet that is inside ur carb and change it to a smaller jet stream or a bigger one.... now u do get better mpg and more hp..... but a problem with rejetting is that if u live in a region with different climates you have to change the jet for warm weather and cold weather.... it is a lot cheaper then the other kinda of mods out there but u also need to know wat ur getting urself into before u tear ur carb apart...

i dont even like to touch my carb

Link to comment
Share on other sites

..... but a problem with rejetting is that if u live in a region with different climates you have to change the jet for warm weather and cold weather....

I thought rejetting was dictated by alititude and not climate?

Basing it on seasonal changes would be a major design flaw....IMNSHO......

-TD

Link to comment
Share on other sites

Rejetting is necessary when there is a change in the air to fuel mixture. It can be with altitude or it can be with changing parts like intake and exhaust components. Now that I have this written I think that txduggan was being a smart as* and this makes me look like a dumbass but I gonna leave it anyway. :dammit:

Link to comment
Share on other sites

i know that it is about altitude,,,,, but wen i called my dealer after installing the kit he said u have to change it to the different climates.... sounded a little odd but i have no idea if he is right or not...

it depends on how thick the air is, like in the winter u drop a size becuase of the air in winter is thiner.

Link to comment
Share on other sites

okay i have a question, What is re-jetting? and how do I do it?

theres 2 jets the MAIN & PILET. the pilet jet is for bottom end power changes and is fine tuned with the air fuel screw, the main jet is for mid and top end power changes a mid power change is done by the needle clip setting and a jetting change, and the top end power change is done with a main jet change and needle if needed. If u are running lean(to much air per gas) then jet up, and if u are running rich(to much gas per air) then jet down.

i hope this helps you.:yes:

Link to comment
Share on other sites

theres 2 jets the MAIN & PILET. the pilet jet is for bottom end power changes and is fine tuned with the air fuel screw, the main jet is for mid and top end power changes a mid power change is done by the needle clip setting and a jetting change, and the top end power change is done with a main jet change and needle if needed. If u runnung lean(to much air per gas) then jet up, and if u are running rich(to much gas per air) then jet down.

i hope this helps you.:yes:

mine was running too lean the other day i think it was from hitting a tree, it shook it up

Link to comment
Share on other sites

theres 2 jets the MAIN & PILET. the pilet jet is for bottom end power changes and is fine tuned with the air fuel screw, the main jet is for mid and top end power changes a mid power change is done by the needle clip setting and a jetting change, and the top end power change is done with a main jet change and needle if needed. If u are running lean(to much air per gas) then jet up, and if u are running rich(to much gas per air) then jet down.

i hope this helps you.:yes:

That's on a 2 stroke. On a 4 stroke there is only one to change for altitude.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Mikey69
      Heres my story. Kinda long. I guess I was a late bloomer when it comes to quads. I had never ridden a quad in my life. Rode Dirt Bikes as a kid growing up. Back in Oct of '06 I found a Mustang on craigslist. Took it for a test drive one morning before work. Fast car. 351 Cleveland. I had planned on meeting the guy again after work. For some strange reason thats still to this day beyond me, I stopped in Hillsboro MotoSports on the way home from work. I had 6 Grand on me. There was a left over '05 sitting by the front door. It was on sale for $4999. It was $5499 OTD. I didnt even look at anything else. I knew nothing about quads accept I thought it really looked coool and I had the money in my pocket to buy it. I was sitting on it when the salesman walked up and asked... "Can I help you?" Without hestitation I pulled 60 Ben Franklins outta my front pocket and said "I want this Quad. Load it up in my truck." It was just about dark by the time I drove away from the shop. BTW, I didnt bother to ask my ol lady if I could buy it. LOL. Anyway, I took it by the house and showed her. She was kinda stunned but not mad. We drove over to a friend of mines house and unloaded it. I took it to the field across the street from his house. HOLY CHIT!!!!! I was surprised by the power. I had it for about 2 weeks and took it to Sand Lake. I was there a few hours and rolled it on a banked turn at the top of the bowl right before you get to the one-ways. When it rolled, I flew off and landed on my belly. The quad came bouncing and landed on my back. For a month I couldnt even walk. I was scared of it. I considered trading it for a 250EX. Went back to the shop. The salesman said..."Dude!!! You dont want a 250EX!!! Trust me. Just get used to it" I still wasnt convinced. I put it on craigslist for $4000. Calls were coming in. I had a guy that wanted to come look at it that evening. I decided to take it for one last ride at Browns Camp before I sold it. I was still afraid of it. After about 5 minutes I started feeling comfortable on it again. I decided right then, I loved my Honda 450 and would learn how to ride it instead of selling it. That was late Nov of '06. Work was slow for a Painter in Oregon. My new job everyday? Going to Browns Camp and ridding my Quad. I bought my Girl Friend an '02 Blaster. I rode my 450 for 4-6 hours almost every single day for 3 months. And yes, I know my way around Browns Camp pretty well. LOL. In March I bought her an '06 TRX250EX (Thank God I didnt trade my 450 for one of those) LOL Since then, I have become totally addicted to quads. I love them. Couldnt imagine not owning at least one quad. Luckily I have two. My "07 was $6500 OTD in July of '07. Bought it for my Girlfriend. Traded in her 250 EX. A month later we broke up. So, I wound up with two Honda 450's.
       
    • By McG75
      Sorry I suck at these forums so if you see this submitted under update status, my bad. Anyhow this is a new shock for a 96 Yamaha Kodiak 400 4x4 it fits my 96 Yamaha Timberwolf 250 4x4 perfectly. Little narrower are the bottom than the original but everything else is perfect. I extended it to almost a half in from full extension because I’m pushing 350 pounds.  It rides and hold me well. So if any of y'allRace driven shock. have been looking for one and didn’t want to do the research here it is. 





    • By rgeiser
      View File 2003 Polaris Ranger 400-500 service manual
      2003 Polaris Ranger 400-500 service manual
      Submitter rgeiser Submitted 04/18/2024 Category Polaris UTV  
    • By Gwbarm
      I have been exploring all the options available, so many, its hard to choose. I have kind of narrowed it down to the Honda Pilot, Subaru Outback, and Kind of looking at the Outlander, although its a little small,  the new one is nice looking. Just wondering if anyone has any recommendations or gripes with any of these rides. I have driven Jeeps for the past 25  years and they have been great, but their price point has gotten to high. Expieriences good or bad would be helpful. Thanks!
    • By DrtyGrlKristin
      Just thought I'd start a new thread for newbies to the site!
      If you're new here, tell us who you are, where you're from and what you ride!!!
      Lets get to know each other a little better shall we?
      I'm not new to the site, obviously, but...
      I'm Kristin from Denver!!! I ride a 2008 Yamaha Rhino. She's my muddy baby!!!!!! Several aftermarket parts on her. She's good to me! We try and ride every weekend. This weekend we're off to MOAB! :woot:



×
×
  • Create New...