Quantcast
Jump to content

Recommended Posts

Posted

get some metal pipe get a welder and a pipe bender.... make the curtain bends needed to come from the engine to the back... and then weld it all together... and then buy to mufflers... or u can use the one u have now and buy the same one.....

Posted
get some metal pipe get a welder and a pipe bender.... make the curtain bends needed to come from the engine to the back... and then weld it all together... and then buy to mufflers... or u can use the one u have now and buy the same one.....

hah sounds expensive,

Posted
i dont think it is that expensive u just need to know wat ur doing.... i think a 250 with a dual exhaust would be sick... but u r probably making ur engine struggle more...

once the money floods in im gettin one of those 240 kits for like 200 bucks:wink:

Posted
A dual on your ride would look sick but it would be a waste of money, in my opinion.

BINGO! a dual is jus for looks basically. an FMF or pro curcuit pipe would produce as much if not more flow than the dual.

IMO the duals look sick but not worth the money. spend that extra cash on other needed stuff like suspension, tires, etc

JMHO

Posted
BINGO! a dual is jus for looks basically. an FMF or pro curcuit pipe would produce as much if not more flow than the dual.

IMO the duals look sick but not worth the money. spend that extra cash on other needed stuff like suspension, tires, etc

JMHO

i was just making an idea

Posted

Do it up, you would be the first that I've seen. We're not knocking your idea just letting you know with the amount of money you will spend on 2 silencers and fabing a mid pipe and header it would be over kill for that bike. Only 2 machines have any business running duals, the Raptor and the Banshee.

Posted
Do it up, you would be the first that I've seen. We're not knocking your idea just letting you know with the amount of money you will spend on 2 silencers and fabing a mid pipe and header it would be over kill for that bike. Only 2 machines have any business running duals, the Raptor and the Banshee.

i just dont want to screw it up so that i cant have a running quad anymore

Posted
It will run but you will lose power. You only have one exhaust port on your motor, if you put a "Y" connector in line of your exhaust the exhaust will not flow smoothly.

ahhh, i see

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By Rick Shropshire
      I’m looking at replacing rear brake calipers on both of my blasters. I was told that the only thing available was a hydraulic upgrade? I’d prefer the original. Anyone?
    • By skittle021
      So I've got a Hisun 550 that I was doing some work on that required removing the CVT and it's housing. Upon attempting to reinstall the clutch, sheaves, etc, I found that the belt no longer fits - it's far too wide. None of the parts have been replaced, they're all OEM. Exactly the same parts as what I took off a few weeks ago.
      To be more specific, my belt is 1.25in wide, but the gap between the clutch and the primary sheave is only 7/8in wide. I'll include a few photos to explain.
      Has anyone ever experienced such a bizarre problem? Any help at all would be appreciated, I've been stuck on this for a month. I'm open to just about any suggestion.
      Photos: 
       





    • By skittle021
      So I've got a Hisun 550 (clone of a Yamaha Rhino 660) that I was doing some work on that required removing the CVT and it's housing. Upon attempting to reinstall the clutch, sheaves, etc, I found that the belt no longer fits - it's far too wide. None of the parts have been replaced, they're all OEM. Exactly the same parts as what I took off a few weeks ago.
      To be more specific, my belt is 1.25in wide, but the gap between the clutch and the primary sheave is only 7/8in wide. I'll include a few photos to explain.
      Has anyone ever experienced such a bizarre problem? Any help at all would be appreciated, I've been stuck on this for a month. I'm open to just about any suggestion.
      Photos: 







    • By SnowmanTX
      Hello!
      First time poster here, looking for help. This will be long, but I want to give you the whole story.  I'm very confused because I am a fairly experienced mechanic but must be missing something. A friend who is not mechanical brought me a 2003 Eiger 400 automatic that didn't run. A quick inspection revealed that the motor was seized. I pulled the top end and found the cylinder and piston rings were rusted together from the machine having been submerged at some point and then left to sit for several years.
      I put in a new piston and cylinder and checked the valve lash. Compression test today was 150 psi.  Replaced the corroded vacuum petcock with a Yamaha petcock, cleaned the fuel tank out, and replaced all the fuel lines. Replaced the badly corroded carburetor with an Amazon aftermarket model (with good reviews) and it wouldn't start. Found that there was no spark so I substituted an Amazon 4-pin CDI box and found that I now have good spark. It still wouldn't start so I used a little starting fluid and it fired right up for about 3 seconds.
      Now, after cleaning and checking out the new carburetor, I have found that when it cranks and fires, the engine actually kicks backwards momentarily and then resumes cranking. It is acting like the spark is way advanced and it is firing before TDC. I know that it is turning backwards momentarily because I still have the recoil off and I can see the starter cup rotating and then literally stopping momentarily when it fires. I've had the flywheel off to check the magnets and the woodruff key. The flywheel does not have the exposed magnets, but the fully enclosed magnets like the replacement RMStator flywheel. The woodruff key was in perfect condition. The pickup coil resistance test was good.
      Since it seems like a timing issue, I pulled the cylinder head off again and double-checked the timing. It did appear that the timing marks were off by one tooth, so I corrected that and thought that I had found the problem. Unfortunately, it still does the same thing...It will crank just fine, but won’t start, and kicks backwards when it fires whether I use starting fluid or not.
      Since the timing is not adjustable on this machine, I’m wondering if the factory CDI circuitry incorporates any type of variable timing feature that is dependent on RPM?  That is about the only thing I can think of.
      I've read other threads that discuss this "kickback" symptom and the usual culprits are weak battery or a too lean condition causing preignition. I've installed (and charged) a new battery and triple-checked both carburetors...the original one that I completely cleaned, and the Amazon replacement.  Same response with both carbs, which leads me back to questioning the CDI.
      Any body else run into this?
      Thank in advance for your help.
    • By tanchor10
      Is there anyway to lube the cables to help them move easier? Thanks in advance
×
×
  • Create New...