Quantcast
Jump to content

Recommended Posts

Posted

I know its early.

but what do you want to see for 2010?

me?

more "race ready" minis like the DS90X

a 4x4 under 300ccs. like a 250

umm..The 450R, the KTMs, and Polaris's 525 and 450 go EFI.

uhhhh...more Mud ready atvs like the Mud Pro.

more bigger bore Sport Utilitys.

more manual clutch 250s.

[good ideas: Outlaw 250, Honda 250R, Suzuki R250]

i think Polaris could pull off a VERY light 250.

and it would sell!

Posted

I'd like to see Can Am bring back the DS650. I know they have the 6 and 800's with the renegades, but it needs to be more sporty in my opinion, in other words, lighter, but with the 650 power.

Posted

i dont think ill want EFI, especially for XC races.

why?

because you start from a dead engine. efi quads are much more cold natured than carburated quads.

and if they do make them efi, then go ahead and make 2 models. one with efi and one with a carb.

id like to see the trx450r have a MX version that MIGHT have efi, be 50inch wide and have upgraded LT shocks like the new yfz.

and an XC 450r that has LT shocks but has +1 a arms for XC and a carb.

id like to see something new from the 400ex, liquid cooled or something! the 400 has been basically the same for 10 years it needs a makeover BAD!

Posted
Why is it my "spooge monster"?:laugh: I'm still torn between the 700XX and the Polaris 525 IRS. It is faster and has better shocks, but it's not a Honda.

cause you seemed to be pretty much creaming over it when you were advertising it. lol

Posted
I'd like to see Can Am bring back the DS650. I know they have the 6 and 800's with the renegades, but it needs to be more sporty in my opinion, in other words, lighter, but with the 650 power.

I 2nd that...:yes:

Posted

Top Fuel Rincon for the drag racer in me.

680 Rincon with the Rubicon tranny.

More utility and sport quads for the kids!

No more Chinese

Quads!!!!!!!!!!!!!!

Safety for our kids _uck the low prices of Crapinese quads!

Posted

ok this is sonot something for me to say buuut

i think the outlaw would be your best bet bruh. i think the 700xx will be a wee bit to tipsy. and like i said before you better pray to the good lord you keep the rubber side down.

the outlaw has better shocks. thats the main reason i would go popo.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Forum Topics

    • By Jdeaton011989
      Hi all. I have a timberwolf 250 2nd that will not start.. I thought it was out of time bc the guy I got it from said it just quit on him. The tensioner had a nut welded to it and it was like2 teeth off. I installed new tensioner and chain and it still will not start. It has fire and it will not hit off brake cleaner. It has compression. Haven't put a gauge but I'm sure it will crank and run with what it has. I double checked my work and it's still in time. Spot on. Both valves move. I'm about to put a feeler gauge on them and I'll cone back but other than that any ideas?
    • By vaneleus
      I've been hunting for a rebuild kit or aftermarket replacement without success. Any tips? The OEM replacement is too rich for my blood. 
    • By GTX-Racer
      I am looking for a PDF version of a manual for a Suzuki Quadrunner 250.  I am not sure of the year, but believe it is a late 1990s model.
    • By wilmpie
      hi everybody
       
      I have a kymco mxu 250 automatic from 2006 250 cc  that keeps going forwards or backwards when i shift backwards or forwards an then shift to neutral .
      if i shutdown the motor and push the quad and restart then its in neutral and don't go forwards or backwards, i already checkt if my motor is running good stationairy .
       
      what can it be or what can i do to fix this?
      thanx in advance
      p.s. Sorry for my bad english it's not my first language.
       
       
       
    • By dkgg5755
      This thing came with a cheap aftermarket carb on it the problem I'm having is it won't start with choke installed into carburetor it will start and get run without it installed then bogs out after about 2 min run time I've checked timing , compression, checked valves for proper clearance , also did a smoke test for air leaks found none. 
×
×
  • Create New...