Quantcast
Jump to content

Recommended Posts

Posted (edited)

Hi, I bought a four wheeler that i believe is a Kazuma. It says 150cc, there is a sticker on the rear left fender that talks about gas, oil, spark plug&gap, it also says the engine family is 7avtxox(by or times) .15nfg. it also says it was made in China and made by chongqing astronautical bashan motorcycle manf. co. ltd. i bought this from a guy in jamestown. i found the ad on craigslist. I am 14 and decieded to buy a atv. mjl01.jpg

Edited by swampcat07
Edited pic link to reflect profile picture. You can not link to your mail program. Try Photobucket or flickr.
Posted

the sticker on the fender says the displacement is 149cc but the sticker on the side of my atv just says 150cc. no other stickers or company names beside who made it on my first post..

Posted

Yesterday i tried to upload a picture of my four wheeler but it just came out as a little box with a red x in it, so i figured out how to upload it as my profile picture so maybe someone seen it before and ould tell me the make and/or model. thanks

Posted

As a first step I would see if you can obtain the original bill of sale/origin from the seller. You will need to get that if you want to register it anyway.

They change body type/style so much it will be hard to tell about your ATV from the pic.

Here is a link for tech service at Bashan.

For technical support, you're requested to send your e-mail to [email protected]

  • 2 weeks later...
Posted

With so many chinese knock offs on the market today it's hard to say what your quad is,,,,but the guy down the road from me sells these and it looks like yours..Hensim brand probably GY6 engine and auto tranny, honda clone engine and parts are easy to get my son had a Carter Talon 150 buggy with that engine and it was a good runner..... :cute:Hensim 150cc Utility ATV Quad

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By TomJulio
      My 1992 TRX00 recently stopped firing.  I understand this is a common problem. I have ordered an aftermarket CDI unit.    TJ
    • By digrig
      Hey everyone,
      I’m having an issue with my 2021 Polaris Sportsman 570 – the engine keeps stalling after running for about 10–15 minutes. I’ve checked the air filter, spark plug, and fuel lines, but can’t seem to find the root of the problem. It starts up just fine, but then loses power suddenly.
      Has anyone experienced a similar issue with this model/year? Would appreciate any advice or troubleshooting tips you’ve tried that worked. Thanks in advance for your help!
    • Guest
      By Guest
      Hey all, new to the forum! I just bought a 1998 Kawasaki bayou 300, 4x4 not running. Initially I found no spark. Ended up playing with the plug wire (made sure plug top and wiring was touching) and got spark yesterday and the quad fired up off ether. Come to work on it today and now no spark again. Before I got spark and now today if I touch the plug after cranking I get shocked, and it will spark after I release the starter button. I was jumping the quad with a freshly charged car battery that has 12v while cranking. Cleaned out the kill switch and ignition button. All looks good. Purchased new plugs. They're are a lot of wires cut/ disconnected. But shouldn't matter if I got spark without them connected... 
    • By RGS
      1989 Moto 4 YFM350ERW intermittent spark.
      Quad has set for about 7 years and was running when parked.  When I replaced the battery and attempted to start it had no spark. 
       
      What I have done.  Followed troubleshooting in the manual. 
      1.       Coil failed the resistance check so I replaced it.  Still no spark.
      2.       I performed resistance checks on the stator and they all pass.
      3.       Found a bad rear brake stop switch and unplugged it and connected the wires in order to disable.  Now I have intermittent spark.  I believe that the issue is with either the stator or CDI and not sure which.
      1989 seems to be a transition year for electrical.  I can get new aftermarket CDI units for 87-88 and 90-94.  I cannot get ones for a 89.  I can get new stators for 87-89 and 90-95.  Looking at the schematics the wiring on my moto is closer to the 90 ones on the ATV side of the CDI and closer to the 87-88 on the stator side of the CDI.  Looking at part supply sources the stator housing is the same part # for all the years and looking at some of the stators on Amazon that have the dimensions on them both of the stators are the same size.
      What I am thinking of doing is to replace the stator and CDI with a 90-95 one as these parts are all readily available.   Does anyone know if this has been tried before and if there are any issues with doing this.  
       As a side note I also have a 1993 Moto 4 YFM350ER that has been sitting longer but it is located about 400 miles from me at this time.  By doing this change in addition to being able to get parts I will also have 2 ATV’s that are the same electrically. 
    • By ncutts
      hey all looking for some guidance on my KQ just replaced stator, and regulator on the quad and after putting all the plastics back together and finishing the snorkel kit she has no spark when i check voltage on the power wire going into ignition coil im getting about 12v and if i crank it im not getting my "peak voltage" (80v) any help would be greatly appreciated
      thanks , Nick
×
×
  • Create New...