opiewhitaker

on the tensor take out the phillps screw and the is a slot located in the hole witch will lock it in place will you insert the tesioner after bolt up turn the slot in the oppiste dircition to release.

theres only one drain at the bottom of motor and only filler located at the top of the tank fill slowly it holds ruffly a quart and 3/4.

no they dont if you match them with ur motor if you run stock highcompression pistion go with a stage 2 hot cam but you must remove the compression release. i have a 400/ex 460 big bore mil crank stroker with a stage 3 but i can go to webb stage 5 using 114 octane this big can be seen o this web site.

paddles run about $420.00 a set.

go on line with scat/trac or wicked atv ask for 10/21/8 or 10/21/10 dubble buff tire on douglas blue lable they should have what ur looking for tell them opie sent you ok.

go on line with scat/trac go with 10 21 8 paddle no more than 10 paddle dubble buff not used on hard drit or trail rides. on douglas blue lable. or go on line with wicked atv tell them opie sent you.

go on line with scat/trac go with 10 21 8 paddle no more than 10 paddle dubble buff not used on hard drit or trail rides. on douglas blue lable.

go on line with scat/trac go with 10 21 8 paddle no more than 10 paddle dubble buff not used on hard drit or trail rides.

to me there is a big differance i have 400/ex i use to sanddrag with i use ngk dpr8z. champions dont hold up under the heat produced by the 400/ex if you notice on longer rides your motor oil will get lower due to heat evaporation produced.

sharp are there any other opions for other bikes.