Quantcast
Jump to content


new guy with questions: 2003 Polaris Predator 500


Recommended Posts

i just got a 2003 predator 500

its got a k/n filter and the polaris pure pipe so im guna assume its jetted to go along with those

i gota couple questions how often do i need to change the oil on this thing

i adjusted the rear chain and cranked those two bolts to tighten the carrier, and rode for a good 5 hours and it was loose by the end of the day, i was thinking of making a wood wedge or something to prevent the axle for rotating back to the loose position (hard to explain sorry)

and lastly that polaris pure exhaust sounds good but is just a little too loud i know some exhausts have like adjustable baffles you can take out or add more can i quite this thing down without having to buy another silencer?

thing goes like a raped ape i love it!!!!

Link to comment
Share on other sites

Welcome to QuadCrazy!! Yep I rode 2003 Predator and they are very quick and fun to ride. I would change oil according to hours. I clean my air filter after ever ride. I do think you may be able to buy baffles for the pure exhaust but you might need to repack it also.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By BruceG
      Hi guys. I have a problem where the quad will start and run well for about 5 minutes and then it dies. On inspection the airbox has oil in it (quite a lot). The oil is pumping through the cylinder head breather hose. This problem first happened suddenly. I have since done the top end including, piston, gaskets, rings and valves. I have also done the carb (not that I thought that this was the problem). The compression seems normal. The only thing that I can think of, is that I did not grind the valves well enough. Anyone experienced this? If so, how did you fix it? Any other thoughts?
    • By ethie
      Hi All
      I have a 2012 Coleman 500 Outfitter that keeps fouling out the plug within 10-15 minutes 
      not sure where to start
    • By McG75
      1996 4x4 Timberwolf rearend width. Can someone with some knowledge of these machines answer this question for me please. Are all 4x4 timberwolves this narrow in the rearend? These tires are so close the right one actually rubs the muffler.  Thinking about seeing if there are any spacers out there for it. I need at least an inch more clearance. 
      .
       
       
    • By Mhatayas
      What should I do about this , bad oil leak where the filter cover bolts on . Can I use some gasket maker 

    • By rgeiser
      View File 2003 Polaris Ranger 400-500 service manual
      2003 Polaris Ranger 400-500 service manual
      Submitter rgeiser Submitted 04/18/2024 Category Polaris UTV  
×
×
  • Create New...