You can post now and register later.
If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.
After 25 years of driving nothing bigger than my current 570 x2, I have a 22 XP1000 Hunter Edition on its way. Super excited about it. Any tips from fellow riders for someone new to the liter?
Getting ready to test a stator and regulator on a 2000 LTF300. Only reads battery voltage when running. I see the parts manual says 2 different stators, one for X/Y models and one for K1/K2. How do i tell? My vin # is JSAAK43AXY2101941. Thanks in advance.
So here's one I haven't beat yet, could use some input. Honda 300FW was running fine when one day it started bogging at WOT. Figured dirty carb so I cleaned it and still the same. Cleaned again once more by soaking overnight in thinner and then compressed air. Back together tonight and still falling at WOT. Tried a known good plug...nothing makes sense here. The float bowl does seap a bit due to old gasket, could it draw vacuum enough to interrupt fuel?
Help a brother four legger out
Bayou300 acts like it's flooding if it's it's in the Alabama sun all day but, I've cleaned the carb. Sometimes it'll backfire even though the timing and valve lash are in spec. Thought it was sticking float but after 2 times cleaning the carb I'm lost. So
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.