Quantcast
Jump to content


Just My Quad.


Recommended Posts

Thanks for the compliments. I listed most of the mods below although I'm sure I'm forgetting something. I haven't done much power wise; just a few bolt on things. I just wanted to trick this quad a bit on the cosmetic side. The paint is a process called water transfer printing and it is pretty much a paint job complete with automotive grade clear coat.

Oh yeah. She's for sale on ebay (item number: 180297349840). I hate to sell her but change is ever present in my life. :biggrin:

1. WATER TRANSFER PRINT GRAPHICS W/ BED LINER UNDERCOAT

2. NEW 26x14 MAXXIS BIGHORN TIRES

3. NEW ITP SS112 14 RIMS (LIFETIME WARRANTY)

4. NEW TRAIL TECH HANDLE BARS (HI-RISE)

5. NEW ROX PIVOT HANDLEBAR MOUNT

6. NEW ROX HANDLEBAR CENTER PIECE

7. NEW POWERMADD HAND GUARDS

8. NEW ROX HAND GUARD MOUNTS

9. NEW CUSTOM BRAKE RESEVOIR COVER

10. NEW CUSTOM THROTTLE COVER

11. NEW TPI VALVE AIRBOX VENT (x2)

12. NEW DIAL-A-JET

13. NEW DIAL-A-JET SNORKEL

14. NEW FMF POWERLINE EXHAUST

15. UNI FILTER

16. CUSTOM MADE SHIFT KNOB

17. EXTENDED HEIGHT FOOT PEGS

18. WARN 2500lb WINCH

19. Spider Grips

Link to comment
Share on other sites

  • 2 weeks later...
did the wheels and tires erally cut down on the power?

It wasn't a bad difference per say, but it was def. noticable. That is the reason I have 4, 450 weights to go in the clutch. This simple mod should give it back the bottom end that was taken by the tires/wheels.

Sense it's sold (I think), I'm not going to put them in, but I will send them with the quad so the new owner can do if they choose.

Link to comment
Share on other sites

sickkk quad......so now that it's sold..what are the plans for the 09??

Not real sure. I know it is begging for a dual exhaust. :wink: The plastics will remain. Skids will probably be the first thing that goes on it. It comes with respectable tires for factory so I'm not going there yet. It honestly has all the power you could want for everyday riding. I hardly have any miles on it yet, but I am picking out some things that it needs.

:cute:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By BuckBilly
      Good morning to all !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
      Let's see if we can make this a daily event.
    • By NZrider
      My king quad 700 runs rough when cold then won't start some times but not often when it's hot. And occasionally smoke's a lot when it's cold I'm guessing that's rings but I'm worried unless it's causing the other problems
       
       
       
      All help is appreciated thanks
    • By jatho
      Has anyone else had an issue on older king quads where the oil would leak from the top of the head (due to a failed gasket) and drip onto the hot exhaust? Mine got so hot one time it caught fire. Just wondering if this is a common issue, as I've seen the same thing happen on multiple bikes that were the same model. 
    • By mkibbe
      My 2014 750 king quad stalls sometimes when I touch or turn the handlebars,the problem has gotten worse,my machine has 475 miles and is only trail ridden,I have a new factory battery and i have 14.2 volts when the quad is running and 13.3 on the battery when not running,also using a multimeter there is no change in volts when turning the bars until it does stall,If I pull the 40 amp power steering fuse it will not stall.......I've been told its the ECU,Hate to buy one if thats not the problem,but its kinda leaning towards that,,,,,need some opinions.

    • By jatho
      What is the best engine oil to use for the Suzuki King Quad - also any other tips and tricks I should know before doing an oil change on these bikes 
×
×
  • Create New...