Quantcast
Jump to content


very unhappy with first test trial of 07 vinson 500


Tazman6789

Recommended Posts

ok so i bought a 07 suzuki vinson brand new from the dealer. i currently have 120 miles on it thats all. Took my atv out so Tionesta, PA this weekend about a 2 1/2 hour trip. It rained on sat for about an hour, mean time my atv sat under a tree wating for the cold rain to go away. So rain stops wipe the very little amount of water off the atv. go to fire it up gauges come on push start button. Hear the starter relay hum and no start... ok maybe just battery low. pull start and go on my way. get 2 seconds down the trail. Hit my brakes and my gauge cluster shuts off and flickers and goes crazy. let off the brakes it comes back on... continues doing this for about 8 hours. night time rolls around go for a night ride. same ordeal no elec start and gauges not working but now my headlights are barely on and flickering... i thought atvs were suppose to take a beating and keep on rolling. this gets a lil rain on it and goes haywire. Isnt the cluster suppose to be waterproof or at least water resistant? any suggestions what to do with this thing? im very unhappy with it right now. Should i just take back to dealer and shove it down his throat for selling me this or what? i have what the dealer called a 6 month bumper to bumper warranty? any suggestions would be great. Thanks for any help

Link to comment
Share on other sites

now that its dried out for a day it acts like nothing happened making me think its a wire short some place all gauges work starts fine works great... even before the trip i noticed after i let the atv sit for a week or so it wouldn't elec start it would just make the relay hum like the battery was almost dead. Thought nothing of it till this weekend when it wouldnt stop doing that. Guess ill get it wet and take it back to dealer even tho the dealer i got it from was a bunch of idiots in the first place. guy didnt even know to check the coolant level before they send out a brand new machine...

Link to comment
Share on other sites

ok so i bought a 07 suzuki vinson brand new from the dealer. i currently have 120 miles on it thats all. Took my atv out so Tionesta, PA this weekend about a 2 1/2 hour trip. It rained on sat for about an hour, mean time my atv sat under a tree wating for the cold rain to go away. So rain stops wipe the very little amount of water off the atv. go to fire it up gauges come on push start button. Hear the starter relay hum and no start... ok maybe just battery low. pull start and go on my way. get 2 seconds down the trail. Hit my brakes and my gauge cluster shuts off and flickers and goes crazy. let off the brakes it comes back on... continues doing this for about 8 hours. night time rolls around go for a night ride. same ordeal no elec start and gauges not working but now my headlights are barely on and flickering... i thought atvs were suppose to take a beating and keep on rolling. this gets a lil rain on it and goes haywire. Isnt the cluster suppose to be waterproof or at least water resistant? any suggestions what to do with this thing? im very unhappy with it right now. Should i just take back to dealer and shove it down his throat for selling me this or what? i have what the dealer called a 6 month bumper to bumper warranty? any suggestions would be great. Thanks for any help

Did you get this problem worked out? I just bought the same quad, brand new and zero probs out of mine...I assume yours was a leftover from 2007 like mine.

Link to comment
Share on other sites

  • 2 weeks later...

no i have to take it to the dealer problem im having is i work until 5 every night by time i go home load up and get out to dealer they're closed. ill get it out there eventually. hope its something stupid cause the atv runs like a champ besides the elec problems. Tried starting again lastnight and it wouldnt elec start so we'll see

Link to comment
Share on other sites

well i feel like a dummy know. decided to clean it up today befor taking it to the dealer. decided to pop the seat off and check out under there... well dumb a$$ me should have checked here in the first place. The spot where the fuses and starter relay are under the seat were completely submerged in water the drain plug was pluged up cause somehow a ton of woodchips and crap got under there and blocked the drain. let the water all drain out and let it dry... SURPRISE it all works again including the elec start. also the negative battery terminal had a lil bit of crud on it again im going to have to put terminal protector on them.... oh well

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Mhatayas
      What should I do about this , bad oil leak where the filter cover bolts on . Can I use some gasket maker 

    • By Uglyside38
      I have a 1988 Quadrunner 250 2wd. My brother in law sold it to my son for $20...had been sitting outside for several years. Got it home and had it running in about 30 mins. Ran it a bit and then went to looking at the carb as it was having trouble idling. Was getting it pretty close, then started losing spark...Also, it wouldn't start up every time...only about 1 in 5 tries. Anyway...now, it has what I can only describe as "intermittent" spark. I can get 1 light spark right when the start button is pressed and sometimes one when it's released...but none while cranking. 🤷‍♂️

      I have replaced the spark plug, ignition coil/wire, and traced wires best I can. I noticed a couple frayed wires at the pickup coil where it enters the case. So, now I have the cover off, stator and pickup coil out and trying to test the coil. I do have about 114 ohms resistance for pickup best I can tell. And I can read minute voltage when I drag a magnet across it. Could it still be bad? Can a bad ignition switch/button cause this? (I did have the switch off to oil the choke cable)...pulling rope makes no difference though...any ideas or help would be greatly appreciated!!! It's the intermittent part that's throwing me off! 

    • By mehim
      Hi everyone. 
      Let me explain the thread title. 
      My husband and I are very active in the nudist community, and we have stayed at many and most of the mainstream nudist and clothing optional campgrounds in the USA. We are now approaching our retirement and would like to start a podcast to share those off the road / backwoods / little known camping areas where nudity is allowed. We have purchased a 5th wheel camping trailer with a rear garage for the ATV and now need some good reports on the one to buy. 
      We are most interested in a side by side unit but would love to get your thoughts. 
      Feel free to stop by and say Hi and ask anything you would like to better understand what we are looking for in an offroad unit. 
      Thanks for reading and hope to hear from you. 

    • By hardcastle
      My friends KQ 300 starts fine and runs, as soon as you put it in gear and try to accelerate its bucks and farts like crazy, not moving... I cleaned carb and it worked good for 1 day... now back to same problem.... could it be such as a bent valve????
    • By Louznmemind
      Howdy y'all, I'm trying to fix a neighbors 2015 Brute Force 300. Came in with hard to start and won't idle except on choke issue. I pulled the carb and found the pilot jet as well as the emulsion tube partially clogged. Cleaned up everything, put it back together, still having issues...  It will start right up on choke and will also start off choke if you give it just a touch of throttle but it absolutely will not idle unless it's choked just a touch. Also, excuse my ignorance but I'm assuming the "dial" thingy attached to the carb that turns in and out is for setting idle?? 
×
×
  • Create New...