Quantcast
Jump to content

Recommended Posts

Posted

hello new to the site. I have an 05 500 and it will not idle in the cold or warm i have to pump the gas on the carb then it will start then i have pump it a few times or hold it on a fast idle or it will quit if i want to let it sit and warm up i have to keep it at a fast idle then have to slow it down so it will go into gear. have not taken the carb off yet??? wondering where to look first thanks

Posted

I would start with a thorough cleaning of that carb, make sure to clean EVERYTHING, take it comlpletely apart and blow out all small passages with compressed air. Also, check any rubber parts like diaphragms, gaskets and o-rings.

P.S. could someone move this into the Artic Cat forum?

Posted

thanks for the help i have cleaned the carb and it is all good now seems i had some mud in there would not know how that happened..lol now the only thing is that if i let the bike sit for a day or two i have to pump the carb primer a time or two to start it is that the norm??? and thanks again for the help

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By Brent Wright
      What's a good size to start a 10 year old on?
    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Dutchaaron
      New to the site. Im rebuilding a Kawasaki Bayou 300. The wiring is my biggest challenge.
×
×
  • Create New...