Quantcast
Jump to content

Recommended Posts

Posted

Napa sells a cheap 12v round light, black cased and roughly the same size as the stockers, maybe a bit smaller. A friend of mine uses them on his Tecate, they work great for him. Come to think of it, I have the same lights in the front of my Blazer, here is what they look like.

IMG00056-20100306-1225.jpg

Posted

dont put auto parts store ones on there they wont last, get a set off ebay or craigslist for cheap, they fit off warriors and banshees alike, even some yamaha 4x4s just not sure which ones, but the aut parts stor ones dont last unless you buy the expensive ones, i have been telling people for years, my buddy wouldnt listen to me and put foglights from a car on his suzuki, lasted one ride and one shatteres and the other filled with mud, i orderes him ones of ebay for 20 bucks for the pair, plugged them in, bolted them in the correct factory designed position and they have been working fine for over a year now :-)

Posted

Not every situation is going to be the same, my friend has been running the same pair of "auto parts store" lights on his Tecate for the last 6 years with no problems. The lenses are actually pretty thick and durable on thes particular ones.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Arizona
      Just recently bought a dead 06 Eiger, Can someone post or send me a wiring diagram for it:? 
      Need to check all wires, no power in most places, Cant seem to read the ones from online manual,
      too blury and cant tell wire color. Just too small. Thanks Az
    • By Peisledder
      Hello, can someone help me? I have a MAP error code 102-3, and the MAP has 4 wires: light blue, orange, purple, yellow. I’m getting different results on what the wires are. I don’t have wiring diagram. Can someone confirm which is ground, 5v, MAP, and Temperature?
    • By Rick Shropshire
      I recently picked up a  2000 warrior 350 and it doesn’t have the air filter box so I was thinking about using a clamp on filter directly on the carb.  Anyone know what I need to get or where I can find it? The one I ordered goes in the box and won’t fit directly on the carb.
    • By davefrombc
      I added a pdf of  the wiring of the various connectors used in vehicle socket  and trailer plug wiring to the  "Other ATV files"  section in downloads.
    • By Need-help-with-quads
      So I picked up a 1995 Yamaha warrior a while ago and it ran decent with quite a bit of power, I was able to wheelie like nobody’s business, but I noticed that the air filter box lid had bunch of holes drilled in the top and hole in the side, also the air filter itself was serving no function and there was a huge rip in it. So I got a new air box and new filter and when I installed it, the quad lost all power and acted like it was cutting out for split seconds at full throttle. For reference I think it was running rich before because it would backfire a lot so I think it’s just restricting air flow, but how would I adjust to that because I tried leaning out the carb as much as I could but it didn’t seem to do anything unless I put the other airbox lid on with the drilled holes.
      any help would be much appreciated
      Also even when I put the old lid on, it seemed like just the new air filter gave it enough restriction that it still wouldnt run right
×
×
  • Create New...