Quantcast
Jump to content

Welcome to QUADCRAZY!

quadcrazy

By quadcrazy
in New Members Area!

 Share

Recommended Posts

BriggsMST Newbie

BriggsMST

Posted
Posted

Well I just joined this site and figured I'd say hello. I was taking a tour of the place and liked what I was reading and the site it awesome.  Looking foward tomeeting some of you.     👍

  • Like 2
  • 1 month later...
  • 5 weeks later...
AgmansGrizzly Rookie

AgmansGrizzly

Posted
Posted

Hello to everyone,

I just joined tonite so I guess Im about as new as one can be! lol

I have a small farm in north central Missouri, I have a couple Yamaha quads, an 02 Grizzly 660 and an 87 Big Bear 400. From what I have seen thus far this seems to be a friendly, knowledgable, and helpful group of people and Im excited to be a member. I hope I will be able to contribute as well.

It would be wonderful to get together with other members to go riding someday, if at all possible.

Best wishes to all!

 

  • 3 weeks later...
  • 1 month later...
  • 1 month later...
  • 2 weeks later...
  • 2 weeks later...
weekdaze Rookie

weekdaze

Posted
Posted

I'm new to the site as well. Working on fixing up 1992 Bayou 300. I'm struggling to break the beads on the front tires to add tubes (they are close to end of life). Also need to find an o ring for the oil cap (it's either missing or disintegrated). 

  • Like 2
DigitalENCOM Apprentice

DigitalENCOM

Posted
Posted

Hi,

I am new to quads, I got my kids a 2021 Kawasaki 50cc and I ended up riding it and doing a few easy mods to it. I think I took the spark resistor out of it and the speed screw out and also took the clutch speed collar off the clutch and at that point I wanted my own to tinker with. My brother in-law sold me a 1997 Suzuki LT-F250 QuadRunner for 200 bucks and it had a Chinese carb on it and would not run. I did some tinkering and seen that it for sure needed a carb and a fuel pump. So I bought a used Mikuni Carb original to it and a shindy carb rebuild kit and rebuilt the carb and put a new fuel pump on it and now it runs fine. I have maybe 380 bucks tied into it total now. Kinda got the bug now..lol

DigitalENCOM Apprentice

DigitalENCOM

Posted
Posted
4 hours ago, George Henry said:

Good activity here at QC. Welcome to all the new members!

DigitalENCOM you have a well started wonderful journey.

Good job rebuilding a Mikuni original used carb.

Enjoy the "bug".

Thank You!

Stilkikn Apprentice

Stilkikn

Posted
Posted

Hello from Missouri, 72 year old outlaw here doing his best to stay in the game.  Owned several bikes in my life, but just acquired my first quad. It's a Yamaha Bear Tracker, still working out what year it is but think it's a 2002 give or take a year. It had sat for several yrs before I got it so has a few problems. Both front brakes were locked up. I released them by loosening the connection at the master cylinder just so I could push it the ramps onto my pickup. Will look into that later but right now my first priority is to get it running. I was able to start it when I got it home by giving it a shot of starting fluid in the carb throat but wouldn't stay running. Took the carb off and gave it what I felt was a thorough cleaning and it did help. It starts and can even be rode but bogs down under a load and have to go very easy on the throttle to get it going. Big improvement over yesterday but looks like I'll need to give the cleaning another go round, apparently missed something somewhere. Anyways, came here looking for information so glad to be here and and any advice will be much appeciated. 

  • Like 1
Stilkikn Apprentice

Stilkikn

Posted
Posted

Follow up on carb cleaning. Took it back apart this morning and repeated everything I did yesterday plus ran copper wire into every orifice I could find and put it back together and re-installed. Started right up and runs great. Don't know what I missed yesterday but must have found it today. Rode around the fields and woods for about an hour with no problems. Next step is to get the front brakes working which I hope to get to tomorrow. Two of the four tires are leaking air through cracks and around rims so considering whether to put tubes in them or bite the bullet and replace the tires. Tons of tread left on the old ones but sitting in the dirt for so long has taken a toll on the rubber.

  • Like 1
  • 1 month later...
  • 3 months later...
  • 2 weeks later...
  • 2 weeks later...
  • 2 months later...
Pyro Newbie

Pyro

Posted
Posted

Hey! Richard from Australia been into motorbikes all my life but new to quads ..just picked up a kawasaki klf300 98 or i think you guys call it a bayou ? Any ways it  an older model so needs a bit of tlc and looking to spending a bit of time on it doing it up a bit and looking for a service manual for it if anyone could help out where i might be able to download one or even buy it. Thanks :)

  • Like 2
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • MikeDB
      New Member from South Mississippi
      By MikeDB
      Greetings to all.  New to the forum, but not to ATVing.  I started when they only had 3 wheels!  Getting back into riding.  Polaris 850.  Too many bells and whistles, but what do you do.  Scouting out places to ride legally now. 
    • tflack500tbx
      2005 TBX 500 Auto HELP Please
      By tflack500tbx
      Background,
      This winter (Dec.) I was plowing and everything just died, just quit.  No lights, no pull start, No nothing.  I've had this problem before and I changed the voltage reg and it ran fine for over a year. Then this.  So I changed it again, thinking this was the same problem.  Tried to start it and a small pin hole in the CDI appeared with electrical smoke.  
      Months go by and I finally decide to just replace parts (I'm Horrible at electrical issues).  I changed the stator, new CDI, new Voltage reg, new starter solenoid, tested the starter (prefect), charged the battery.  
      Went to start it and the solenoid rapidly clicked.  All the dash lights on, headlights work.  Pull stared it and it fired right up no issues.  Looked into the rapidly clicking starter solenoid and it was not enough juice in the battery.  Took the battery completely out and hooked up a jump box to it turned the key, light on, everything looks good.  Pushed the starter button and it fired right up ran great.  Turned it off to test it again, Turned the key and nothing.  No dash lights nothing.  Took the jump box off and pulled started it.  Started it right up.  Re-hooked the jump box, still nothing.
      Any Ideas? 
    • junkviking
      New member from Atlantic Canada.
      By junkviking
      Just a quick hello from Atlantic Canada.
    • Toro8
      New member from Kansas City
      By Toro8
      I just bought my 1st quad. An 86 Moto 4 225. It is for a small engine class that I am teaching in January.
    • ScottK
      New Member from SK.
      By ScottK
      Hi all! I'm a new member from northern Saskatchewan. I plan on buying a new ATV and do some exploring in the Precambrian Shield/Boreal Forest this coming Spring.
      I hope to learn as much as I can on here before I make a purchase.
      Thanks. 

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...