Quantcast
Jump to content

Recommended Posts

Posted

Hey Gary, can you locate the vin number ? It should be located in the front lower push bar on the cross brace.  If you can find that number there are a few web sites that decode the vin for free and tell you the year and model of the bike.  The 10th number or letter of the bikes vin# is the year of the bike when cross referenced on the vin decoder.  Do you know the model ? 

  • Ajmboy changed the title to Help Identify Old Honda 4x4 ATV
Posted
On 11/02/2018 at 2:27 PM, Gary Patch said:

hi have really old Honda 4x4 how do I find out model no  etc as need new starter motor think its 350 cc but not sure thanks in advance

hi how do I add pics can't seem to upload them

Posted
1 hour ago, Gary Patch said:

hi how do I add pics can't seem to upload them

Like @Frank Angerano said and you can also copy and paste into a topic. So if you copy an image just click paste and it'll upload. You can also add it to the gallery section and take the URL and copy and paste into a topic.

Posted

Lightly sand the  bar  it is stamped into  and you might be  able to  make it  out. On older   Honda 4 wheel  ATVs  it  is  on the   round crossbar in the  front.  Mine was hard to read  ev3n  after sanding the  rust off but I found enough to use a chart of 1991  VINs  to  find  mine  listed.  I was lucky there  was  only one letter unreadable.

This site  has a chart of all the Honda bike  and  quad model  number  and tear  listings.. The   4trax entries  are  way  down the  list.

https://www.motorcyclespareparts.eu/honda-parts/honda-model-prefix.aspx

Your   vin  will  start  with 478TE.  The next  two  or 3  numbers  will  identify  the  model series . The  1988 to 2000 models have  a  150 there. Further on in the  vin there will be  a  letter to identify the year.

The 10th digit in a 17 digit V.I.N. or frame number represents the year of your ATV, motorcycle, or car.

A = 1980  B = 1981 C = 1982  D = 1983  E = 1984  F = 1985  G = 1986  H = 1987
J = 1988   K = 1989  L = 1990  M = 1991  N = 1992  P = 1993  R = 1994  S = 1995
T = 1996  V = 1997  W = 1998  X = 1999  Y

  • Like 1
  • Thanks 1
Posted
On 2/18/2018 at 11:41 AM, Gary Patch said:

Yeah done all that just get error message upload failed can't read vin number either 

I uncovered a server issue that may have prevented uploads temporarily, so please try again. 😁

  • Thanks 1
Posted (edited)

I  can't tell you the  model  or exact age,  but it is   definitely 2000 or  newer. Before  2000 they  did not  have  any instrument panel. I would  guess between  2000 and  2003.

 

 

Edited by davefrombc
  • Like 1
  • 2 months later...
  • 1 year later...
Posted (edited)

I have a 1994 trx300ex. What is the difference between the (trx300ex A) and the (trx300ex AN) and how do I know what mine is? I have the vin and I searched it but it doesn't say "A" or "AN"

JH3TE1903RT101409 vin#

Edited by Phillip Miller
Posted
11 hours ago, Phillip Miller said:

I have a 1994 trx300ex. What is the difference between the (trx300ex A) and the (trx300ex AN) and how do I know what mine is? I have the vin and I searched it but it doesn't say "A" or "AN"

JH3TE1903RT101409 vin#

That's a question I would like to know also.  In ordering 300FW parts I notice there is an A and an AN.  My assumption is that AN is the Canadian version but I don't know the differences.

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By Cj Winds
      I have a 2009 Honda Rancher TRX420FA with shifting problems.
      Usually it shifts ok when cold but after couple minutes it will stop shifting with no codes.
      The 1st shift clutch oil pressure when in first gear is 74psi. The 2nd shift clutch oil pressure when in second gear is 74psi.
      The 1st shift clutch oil pressure when in neutral is zero. The problem is when the tranny is in neutral the 2nd shift clutch pressure starts around 10-15psi and builds to 20psi. Is this normal?
    • By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

    • By Mikey509
      Hey guys, so I've been messing with my quad, and between all the starts, the battery is dead. Is there a certain way to charge these? Can I just throw a trickle charger on it and call it a day? can i also jump it like a normal car with a battery pack or is that to much voltage 
    • By Mikey509
      Hey guys i recently got a old recon 250 up and going and the prev owners had the carb screws all messed up. i was wondering if anyone can give me the basic run downs on if i turn both screws all the way "tightened" how many turns out will the quad run okay so i can then dial it in. the prev owner had the screws messed up so bad it woudnt idle. i got it to idle but idles rough. its super lean any guidence is appreciated 
    • By HoldenBoy
      Hi all,
      Looking for some help on a starter/bendix issue. Can Am outlander 450 2017. While cranking to start, the starter spins and engages into the ring gear. After a few seconds the bendix retracts while still spinning and there is no damaged teeth on the drive pulley.
×
×
  • Create New...