Quantcast
Jump to content

Recommended Posts

Posted

I dont think so.  I think it was just messed up somehow when I rebuilt it and I put way too much clearance in the rockers...  I'm surprised they arnt damaged..  I rode the bike while it was ticking for a while..

Posted

i broke mine trying to winch drag it over a rock in the snow and it pop'd that rubber drain plug (while running) and sounded like a man drowning on his own blood!!! does that count same as jumping and snappn' a shock :D

  • Haha 1
Posted

I do not mind the longer frame for wheelies myself. weight no.. 

wonder what the weight difference of the bayou vs polaris. how much could it be to prevent wheelies, jumps, and only snapping a shock I mean - that's the best thing to snap! that bayou is doing you right, that clicking is probably kisses you're neglectin :P

 

  • 2 weeks later...
Posted

Had a guy come and drop his bayou off for me to service.  While he was here he asked about my bayou.  Went to start it and it floods out like it did before (last issue I posted about it before the broken shock)  pissed me off pretty bad cause yesterday and the day before it started no problem.....now the guy is probably like what the hecks wrong with this kid- his bike wont even run....though he was a lot nicer than that about it...  so all in all I want to resolve this issue now before I get his bike working so that he could test ride mine when he picks his up...  This is either a sp issue or a ignition coil issue I'm thinking...  Its the 3rd brand new sp the bike has blown since I rebuilt... What do yall think?

Posted

Your float in the bowl may be getting a little jammed up allowing excess fuel to get into the engin/head thus flooding out the sp.  The float has a pivot point where it mounts to the carburetor. Either it’s getting stuck on the way up or the pin that the float pushes up is getting stuck. I know the over flow would show signs of fuel dumping out but it may not be so severe that it’s showing. 

  Also one more thing. The top of that pin has a rubber tip on it.  Take a look and maybe replace the pin if needed. Check that the pivot point on the float looks straight and nothing is restricting its travel. 

Posted

Btw, bayou is for officially for sale for $800 first come first serve lol  if you read this thread, you know all of it's history as far as I've owned it...  massage me privately if interested.

20180105_073211.JPG

20180105_072947.JPG

20180105_073019.JPG

20180105_073223.JPG

I'm thinking the ignition coil is going bad maybe causing a weak spark and that was also causing it to run rich (and after riding the 220, I noticed its a little more sluggish is throwing the power down)

Posted
On 2/22/2019 at 6:36 PM, 06kfx440 said:

Curious. What's your voltage at in the sp boot, coil and stator

Sent from my SM-N920V using Tapatalk
 

I will see if I can check the voltage at the boot.  How is the best way to do that?  Just hook positive of a multimeter to the boot and the other end on the frame?

  • 1 year later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Atomusthenes
      I would appreciate being pointing in the correct direction for a wiring diagram and or schematics of the 88 Honda FourTrax 300 4x4 if anybody has any knowledge of how to test the ignition system stator and CDI I don't know if the voltage regulator probably and also the FCU I put a new ignition in it it is a cheap aftermarket one doesn't have the correct plugs but has the correct wiring scheme I get power  the neutral light comes on and the oil light stays on it turns over but I have no spark
    • By BuckBilly
      Good morning to all !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
      Let's see if we can make this a daily event.
    • By kawasig
      Hello All
      I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
    • By Memphis
      Not sure if in right place but here goes
      My 300 is lacking power only reaching 30mph and struggling uphill everything else seems ok other that this problem cleaned all fuel new filter pan and all new fuel pump and spark plug full oil change is there anything I am missing
      ps It is auto and does noy seem to want to get in another gear 5200 rpm at 30mph
       
      Regards
    • By Mikey69
      Heres my story. Kinda long. I guess I was a late bloomer when it comes to quads. I had never ridden a quad in my life. Rode Dirt Bikes as a kid growing up. Back in Oct of '06 I found a Mustang on craigslist. Took it for a test drive one morning before work. Fast car. 351 Cleveland. I had planned on meeting the guy again after work. For some strange reason thats still to this day beyond me, I stopped in Hillsboro MotoSports on the way home from work. I had 6 Grand on me. There was a left over '05 sitting by the front door. It was on sale for $4999. It was $5499 OTD. I didnt even look at anything else. I knew nothing about quads accept I thought it really looked coool and I had the money in my pocket to buy it. I was sitting on it when the salesman walked up and asked... "Can I help you?" Without hestitation I pulled 60 Ben Franklins outta my front pocket and said "I want this Quad. Load it up in my truck." It was just about dark by the time I drove away from the shop. BTW, I didnt bother to ask my ol lady if I could buy it. LOL. Anyway, I took it by the house and showed her. She was kinda stunned but not mad. We drove over to a friend of mines house and unloaded it. I took it to the field across the street from his house. HOLY CHIT!!!!! I was surprised by the power. I had it for about 2 weeks and took it to Sand Lake. I was there a few hours and rolled it on a banked turn at the top of the bowl right before you get to the one-ways. When it rolled, I flew off and landed on my belly. The quad came bouncing and landed on my back. For a month I couldnt even walk. I was scared of it. I considered trading it for a 250EX. Went back to the shop. The salesman said..."Dude!!! You dont want a 250EX!!! Trust me. Just get used to it" I still wasnt convinced. I put it on craigslist for $4000. Calls were coming in. I had a guy that wanted to come look at it that evening. I decided to take it for one last ride at Browns Camp before I sold it. I was still afraid of it. After about 5 minutes I started feeling comfortable on it again. I decided right then, I loved my Honda 450 and would learn how to ride it instead of selling it. That was late Nov of '06. Work was slow for a Painter in Oregon. My new job everyday? Going to Browns Camp and ridding my Quad. I bought my Girl Friend an '02 Blaster. I rode my 450 for 4-6 hours almost every single day for 3 months. And yes, I know my way around Browns Camp pretty well. LOL. In March I bought her an '06 TRX250EX (Thank God I didnt trade my 450 for one of those) LOL Since then, I have become totally addicted to quads. I love them. Couldnt imagine not owning at least one quad. Luckily I have two. My "07 was $6500 OTD in July of '07. Bought it for my Girlfriend. Traded in her 250 EX. A month later we broke up. So, I wound up with two Honda 450's.
       
×
×
  • Create New...