Quantcast
Jump to content


Rant about price of spare key


Arky217

Recommended Posts

I have a 2003 Big Bear and want to get a spare key for it. Turns out, that in my area, only the Yamaha dealer has the blanks and they want $7.50 !!! to make a spare key.

Even Honda, which is supposed to be pricey, only wants $3.50.

$7.50 to grind a spare key!; I can get a car or house key ground at Walmart for $1.50.

What gives with this outrageous price?

Link to comment
Share on other sites

Welcome to the site Arky217!

I can appreciate your rant, but please avoid posting duplicate threads. You posted the exact same thread in 3 different areas. I removed the other 2. :wink:

As far as your key, that's what happens when it's only available at one place, with no competition...

Link to comment
Share on other sites

  • 2 years later...

key prices are crazy ... i have been charged as much as $13.00 for a key for a quad ... i buy alot of wrecked and non running machines and some times have no key for them .. the dealers i guess hold the rites to the atv's key market and we all get the shaft when needing 1 .. the local john deere dealer gets $10.00 for them and thats any key for there brand ... i guess we just gotta love getting the shaft when going to the dealer for stuff that only they sell...

Link to comment
Share on other sites

  • 8 months later...
So how would I get one for a big bear I bought used? I don't have the most legit bill of sale.. it won't be a problem to get a more official one, though

If you have a key and just want a copy for it, that shouldn't be a problem. If you don't have a key at all, just talk to a dealer and see what it would involve to get a key for it.

Link to comment
Share on other sites

So how would I get one for a big bear I bought used? I don't have the most legit bill of sale.. it won't be a problem to get a more official one, though

The first thing I would do is call the state police, give them the vin and see if you bought stolen property.

Next I would grab a used key switch with key off e-bay or the forums.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By McG75
      1996 4x4 Timberwolf rearend width. Can someone with some knowledge of these machines answer this question for me please. Are all 4x4 timberwolves this narrow in the rearend? These tires are so close the right one actually rubs the muffler.  Thinking about seeing if there are any spacers out there for it. I need at least an inch more clearance. 
      .
       
       
    • By rgeiser
      View File 2003 Polaris Ranger 400-500 service manual
      2003 Polaris Ranger 400-500 service manual
      Submitter rgeiser Submitted 04/18/2024 Category Polaris UTV  
    • By ResQ91
      Hi Guys!

      New member and could really use your advice. I would have to believe this has been an issue for others but a search here came up with nothing......? (Probably me not doing search correctly)
       
      I have an 87 Big Bear 350 YFM350FWT
      The OEM Mikuni BTM carb is shot and would rather replace than rebuild.
      It is no longer made and I have had good luck with NICHE carbs so I ordered a #K-CRB-0006 This was what they said was replacement when ordered. This Carb only uses 1 Throttle cable. The Slide is linked so it uses one. (OEM had 2nd cable coming through top to move slide)
       
      Problem is when I ordered a replacement Cable from NICHE (#C-CBL-0061) the Cable wire is a little short, not allowing Throttle to return all the way down to Idle position. I called NICHE and they are at a loss. Haven't gotten back to me after 2+ weeks.
       
      What would you recommend other than a carb rebuild?
      Can I just use 1 of the OEM cables (It is the right length) and snip/disconnect the other that went to top of Carb for Slide?
      Or ??
       
      Thanks in advance for any advice you have!!
       
      Dave
    • By Admin
      View File 2006-2011 Honda Rincon TRX 680 FA/FGA service manual
      2006-2011 Honda Rincon TRX 680 FA/FGA service manual
      Submitter Admin Submitted 04/09/2024 Category Honda ATV  
    • By Drillbit
      Hey all,
      I need some input on a problem I'm having with my Kodiak 400 that keeps fouling plugs. First off, I've done a lot of work to this thing, most of it all in good fun. Brake work, cv joints, u joints, carb kit, checked valve lash, compression good, changed all fluids, etc... My problem is it keeps fouling plugs very quickly. I can put a new (manual recommended plug) in and it starts right up, runs great, idles great, picks up good. Doesn't stutter at all. I ride it for 1/2 a mile, it cuts off and won't start back up. I let it sit overnight thinking maybe it got to hot. Try to start it the next day, nothing. Put a new plug in, fires right up, runs great for another 1/2 mile or so, dead. The plugs come out and look carbon fouled with dry black soot on them. I don't know if this is a fuel/air mixture problem or a ignition problem. A couple of things that I noticed is I never need to pull the choke out to start it. Also, when it starts it automatically idles high like an automatic choke would do, then it comes back down to a good idle. Also I noticed that the air/fuel mixture needle valve screw does nothing when I adjust it in or out. I can screw it all the way closed and the motor still runs and idles good. Any advice would be greatly appreciated. I'm almost leaning to a ignition breaking down the plugs??
      Thanks! 
×
×
  • Create New...