Jump to content

  • Do you own an ATV or UTV? Join our Forum!

    Join QUADCRAZY ATV Forum today for FREE! We keep these forums clean and user friendly. All first posters will have to wait to have their content reviewed and approved. Once your first post is approved, you will no longer need to got through an approval process. To gain immediate approval and a NO ADS experience, consider subsribing to our Premium Membership.

2007 Arctic Cat 700 EFI 4x4 problems jumps in and out 4 wheeler drive

Recommended Posts

I think that machine shifts into 4wd electronically, if the machine shifts into 4wd manually, start by checking the linkage. If it shifts electronically, there is an actuator assembly on the front drive assembly, I believe that it engages the front diff as well as the diff lock, there is a plug that goes into it. Check the plug for a good connection and check the wires for any damage.

Link to comment
Share on other sites

  • 2 weeks later...

There are two causes for this problem.

The first is that the cable needs to be adjusted. Yes even though it is electronic there is a cable.

Or two the electronic switch has water in it. In this case you can usually hear the switch cycle on and off after getting wet. The solution is to take it apart and reseal it just watch out for the spring mechanism.

Link to comment
Share on other sites

  • 11 years later...
  • 6 months later...

There’s a spring in the front diff to hold it in 4x4 when the actuator is relaxed (out). If the spring is broke, it will likely stay in 2x4 or jump in and out. Also, check the 4x4 relay under the seat, you can swap it with the one next to it to troubleshoot an intermittent problem there.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...