Do you own an ATV? Join our Forum!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
By Ryan Foster
I am trying to find a used OEM cylinder for the above mentioned quad. I was told the current cylinder came from Amazon so I suspect its aftermarket china (made from recycled coat hangers and shopping carts.) Anyway, was looking at the parts list and they have 2 cylinders listed..
My engine case is stamped K403 230829 Trying to figure out what model I have. I see I have a K in there but....
I don't know what the differences are between the cylinders (the first one cost more). Anybody know how to decipher this?
I only have the engine, I don't have the frame to get the actual VIN.
Also, are there any marks on an OEM cylinder to differentiate it from aftermarket?
By Frank Angerano
So i took a road trip today to look at a Suzuki Eiger! 2006 in perfect condition other then the fact it starts for 30 seconds and shuts down.
Its been sitting for about a year in a shed.
It has a plow and a winch included!!!
Got it for a really good price and all looks good so far.
I saw this article on Motosport and thought it was pretty good. Anyone add anything?
You might think hopping on-board an ATV and going for a spin is just as easy as taking your regular 4-wheel car for a ride around the block. After all, both have four wheels. How hard could it be?
In many respects, you're right. Some adventure riders choose quads over their two-wheeled counterparts of the dirt because there's less chance of crashing and it's easier to learn. ATVs also offer more manageability for younger riders to get acquainted with outdoor riding than a dirt bike.
However, beginner riders on ATVs tend to make the same mistakes that result in crashes, roll overs and injury that could be avoided with some instruction and know-how. If you're looking at a fun family outing by renting ATVs or want to get into the sport take advantage of the following points and avoid the same mistakes so many other first time ATV riders make that end their day early or before they barely get started.
1. Nerf Bars
Get Nerf bars. These are not soft cushy add-ons that are cousins to the football you use during backyard football games. In many respects, Nerf bars are gigantic foot pegs. Don't bother with traditional foot pegs because you'll constantly slip off and because of the "I feel safe factor" that comes with riding a quad you'll also have a tendency to let your feet drag when riding. That's a recipe for getting one or both of your feet caught in the back tire resulting in serious injury. Nerf bars allow you to stabilize your feet and get maximum control over the ATV
Rest your feet easy on Nerf bars
2. Rolling Over
Believe it or not, it's fairly easy to roll an ATV over. And you don't want to be on the bottom of that sandwich.
The most common way of ending underneath a quad is looping out. That's done by hitting the gas and having little to no experience with the power of an ATV. The front spikes up like an out of control stallion, throws you onto your back like a bucking bronco and then pins you like a UFC Champ.
The second way is when you're having a bit too much fun sliding around in mud or other slick conditions, the tires finally do what they're designed to do and grip the ground but the rest of the bike, with you on it, keeps going.
Finally, those who think they've found their bearings take aim for a steep slope and try to conquer it only to end up upside down or in their attempt to arch alongside said steep hill, tumble over the side.
3. False Sense of Security
This goes somewhat hand-in-hand with the roll over capability that many riders fail to appreciate therefore they also neglect wearing proper protective equipment. Don't think wearing jeans, t-shirt and sneakers is adequate protection when riding a 4-wheeled machine powered by a gas engine that doesn't have seatbelts. You need a helmet, goggles, gloves and riding boots at a minimum. Once you start ripping it on the track or trails add a chest protector, neck brace, knee brace, etc.
4. Throttle Control
Everybody wants to skip the kiddie stage and get right into hair-raising speed when it comes to riding ATVs. OK, most everybody. But for those who do so many put on the cloak of invincibility and think a quad is merely a mini car that finally enables them to release all sorts of pent up childhood inhibitions.
So they jab their thumb into the throttle with the expectation of a controlled roller coaster ride. Instead, they loop out and end up underneath the quad or manage to stay seated only to careen off course and introduce their 4x4 to a large tree. ATVs normally have a thumb throttle and most have an automatic clutch so the clutch is one less thing to worry about. So go slow and figure out how much "thumb" is too much and get used to the speed and power an ATV delivers before really going for a ride. Oh, one more thing, learn to take your thumb off the throttle!
It's not to hard to loop out on an ATV
5. Loading the ATV
Never, ever ride an ATV up a ramp into the back of a pick-up. If you want to know why just go to YouTube. If you want to know how to load an ATV check out this fine piece of quality information on How to Load a Motorcycle, Dirt Bike or ATV into a Truck.
The bottom line to riding an ATV the first time is treat it like you would anything that comes with a modicum of danger. Careless behavior endangers you and others but with common sense and a willingness to learn you'll enjoy of lifetime of riding quads.
For additional information on riding and/or maintaining ATVs see:
10 Quick Safety Tips for ATV Trail Riding Tips for New ATV Owners Choosing the Best ATV for Beginners 10 Things That Alter Your ATV Performance Written By: AndrewT
I am trying to put a 1994 Suzuki 250 quadrunner back into service. I have it up and running like new but need to replace the plastics as they are brittle and crumbling due to age and sun exposure. I would like to purchase new parts either OEM or aftermarket but have had little luck in finding them. I would even consider used or salvaged parts in serviceable condition. Any help in locating these parts would be greatly appreciated. Thanks in advance.
Similar Tagged Content
these are what i have in my collection ... always looking for more
Linhai 250 - 360 Service Manual
Linhai 260 - 300 Parts Manual
Linhai 260 - 300 Service Manual
Linhai 300 Parts Manual
Linhai 260 Service Manual
Linhai Bighorn CUV Service Manual
By Zacharia Maisonneuve
i have a 1993 timberwolf yamaha and the compression is good and lights work but for some reason the electricity is not going to the spark plug(s)! i got a friend to check it out and they said its no use but im not giving up! please help with this!
By Connor Tuftin
I have a 1988 300 Honda FourTrax, All wheel drive.
My brother and I were fixing up this quad. We put a brand new battery and fuses in and it was running fine until we put the quad into reverse. As soon as it was put into reverse all of the electrical cut out and power wasn't making it to the head unit anymore and both of the brand new fuses popped. We figured there might have been a short from the starter or solenoids, but they are all working properly. At this point we don't know where to start looking for where the short could be. I'm just wondering if anybody has had the same issue or knows of similar issues that could cause these electrical shorts?
Recently Browsing 0 members
No registered users viewing this page.