Quantcast
Jump to content


First Quad...First Project


Recommended Posts

  • 4 weeks later...

UPDATE!

-----------

bout time for another update huh?

well,

some of the decals are here..

couple of polaris ones..

the brake pads.

and im just now getting back to the project becuase of prior grounding.

so.

today, i got her out. and bad news..battery is dead.. so i had to pull start this thing lol.

working on getting the battery charged..i took her out for a niiiiiiice scrubbin' i washed every nook and cranny of her today..

and she is sittin in the garage clean as whistle right now.

i would have all the stickers on but my dad is having problems with our suburban [thats a first] so this week i am really getting back into the project..

selling some things for cash [the ps2, a 10 inch subwoofer,] and collecting cans..[i have like 5 bags right now] which can earn me some good cash..

i think im going for more decals for the first cosmetic mod..

and for performance..i am buying the RCR air box mod kit.

give me a little more flow..

and i think i am deciding on a ceramic finish RCR pipe and muffler..

as soon as i get the money ill be ordering that..which comes with a jets i think..and the clutch kit should be on the way too.

later this summer i should get a flywheel mod..from RCR which removes 13 ounces making engine response better.

but um a question..

does anyone here know an easy way to remove decals?

if so post plz.

thats about it...

any input?

Link to comment
Share on other sites

Power washer works good. Set the nozzle to be thin and adjust your angle and that sucker will blow right off - get it like 1/2" from the plastics. I take off all my stickers this way and most of the time it doesn't even leave behind the sticky residue :)

But WD40 works great for removing the residue. Then clean with rubbing alcohol.

Link to comment
Share on other sites

wooo hooo

i just got done taking all the plastic off..

it took like 2-3 hours...

i did it by myself.

it took a lot to get that crap off.

well my dad just threw the plastic in the back of his truck.

he is taking it to work to get it repaired and painted BLACK!

im excited. not long after this. the rims will be black..i think he will be taking the rims to his work tommorow. the front nose piece im still undecided...lime green?

white?

so i think just a polaris and flame decal on the tank. and the nos piece: a small polaris and big monster M. two big M's on the inside back fenders. and a couple little ones here and there.

sounds good to me.

Link to comment
Share on other sites

Glad its coming along for you.....

and collecting cans

I used to do this as a kid....I would go around to Houses that were being built and ask them If I could place a Garbage Can there and for them to put their Cans in(or plastic Bottles, But back then we didnt have those....LMAO!!!) Do that at Several Different Sites and it works well....People are always willing to help out Kids.....

later this summer i should get a flywheel mod..from RCR which removes 13 ounces making engine response better.

How much do they charge????? I can get it done Cheaper I bet.....I have done this to several of my 2 Strokes.....Very nice Throttle Response once this is done.....

How about some updated Pictures:wink:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By 86ccord
      Starting this build thread to keep up with everything on my build and hope to motivate someone!
       
      I picked up this 2008 Yamaha Big Bear 250 2 weeks ago. A guy that I hunt with parked it at the hunt club for a year or so before I asked him if he wanted to sell. He said " fill my feeder and throw some batteries in my cameras, and you can have it". Sounds like a deal to me! 
      I have attached some pictures of how it sat under a tarp in the woods and when I got it home and cleaned up a little. 
       
       



    • By Mhatayas
      What should I do about this , bad oil leak where the filter cover bolts on . Can I use some gasket maker 

    • By Mikey69
      Heres my story. Kinda long. I guess I was a late bloomer when it comes to quads. I had never ridden a quad in my life. Rode Dirt Bikes as a kid growing up. Back in Oct of '06 I found a Mustang on craigslist. Took it for a test drive one morning before work. Fast car. 351 Cleveland. I had planned on meeting the guy again after work. For some strange reason thats still to this day beyond me, I stopped in Hillsboro MotoSports on the way home from work. I had 6 Grand on me. There was a left over '05 sitting by the front door. It was on sale for $4999. It was $5499 OTD. I didnt even look at anything else. I knew nothing about quads accept I thought it really looked coool and I had the money in my pocket to buy it. I was sitting on it when the salesman walked up and asked... "Can I help you?" Without hestitation I pulled 60 Ben Franklins outta my front pocket and said "I want this Quad. Load it up in my truck." It was just about dark by the time I drove away from the shop. BTW, I didnt bother to ask my ol lady if I could buy it. LOL. Anyway, I took it by the house and showed her. She was kinda stunned but not mad. We drove over to a friend of mines house and unloaded it. I took it to the field across the street from his house. HOLY CHIT!!!!! I was surprised by the power. I had it for about 2 weeks and took it to Sand Lake. I was there a few hours and rolled it on a banked turn at the top of the bowl right before you get to the one-ways. When it rolled, I flew off and landed on my belly. The quad came bouncing and landed on my back. For a month I couldnt even walk. I was scared of it. I considered trading it for a 250EX. Went back to the shop. The salesman said..."Dude!!! You dont want a 250EX!!! Trust me. Just get used to it" I still wasnt convinced. I put it on craigslist for $4000. Calls were coming in. I had a guy that wanted to come look at it that evening. I decided to take it for one last ride at Browns Camp before I sold it. I was still afraid of it. After about 5 minutes I started feeling comfortable on it again. I decided right then, I loved my Honda 450 and would learn how to ride it instead of selling it. That was late Nov of '06. Work was slow for a Painter in Oregon. My new job everyday? Going to Browns Camp and ridding my Quad. I bought my Girl Friend an '02 Blaster. I rode my 450 for 4-6 hours almost every single day for 3 months. And yes, I know my way around Browns Camp pretty well. LOL. In March I bought her an '06 TRX250EX (Thank God I didnt trade my 450 for one of those) LOL Since then, I have become totally addicted to quads. I love them. Couldnt imagine not owning at least one quad. Luckily I have two. My "07 was $6500 OTD in July of '07. Bought it for my Girlfriend. Traded in her 250 EX. A month later we broke up. So, I wound up with two Honda 450's.
       
    • By Spritee1
      having an issue with the unit when running under a load up a hill or in high gear, seems like the belt is slipping, there is a clapping sound coming from the primary clutch like it releases and snaps back in. i don't think I should have a noise like that. this is a friends unit and he has already replaced the primary twice with the same result.
      not sure where to look next
    • Best Fit and Protection Guaranteed for all your cars, trucks, boats, jet-skis and more. Visit SealSkinCovers.com. Seal Skin Supreme Covers come with a Lifetime Warranty. Free Shipping!
    • By justent_88
      Hello, im looking for some input on this situation i have. My 94 Mojave has no spark, and i have no idea what it is. Ive replaced/tested the magneto, the pickup coil, cdi, the ignition coil. Even the key and Killswitch. I haven't tested the harness its self, but i have tried another harness and still nothing. The only thing i can think of is the fly wheel itself. I have found a lot of metal shavings in the fly wheel and have cleaned it the best I could. But nothing happened afterwards. I am truly stumped here and hoping some of yous could shed some knowledge/ideas that could help get this thing to fire. 



×
×
  • Create New...