Quantcast
Jump to content


What offroad vehicles would you buy if money was not a conern?


Recommended Posts

and for the forum i would pick up a jeep cherokee prob 94 or a 96 with manuel 5 speed tranny switch out the axles, add some here and their stuff to the engine add the catback exhaust to it possibly borla get me a 4 inch lift or 4 1/2 and 33 inch mud tires possibly super swampers, nothing to fancy just want something to go through the mud

for atv a arcitc cat trv with crush locks 32 "gorilla tires and gorilla axles 5 inch lift and get steel horses in texas to trick out the motor so its a 1000cc atv... but i would only do that if i didnt live in new york cause their is no were to go with something like that were i live

and a popo 850 xp with 29.5 laws

Edited by outlander560
Link to comment
Share on other sites

yea the budget lifts arent bad was thinking about get a 3 inch and just adding the blocks to the back and front so i can get more lift from that... i was thinking ebay but i dont want to pay that much and find out its missing bolts shocks or something that but thanks for the info... then again im 16 so i think ill settle with my jeep for now ill pay it off and spend money on a lift later down the line... but wat kind of lift u get?

Link to comment
Share on other sites

yea the budget lifts arent bad was thinking about get a 3 inch and just adding the blocks to the back and front so i can get more lift from that... i was thinking ebay but i dont want to pay that much and find out its missing bolts shocks or something that but thanks for the info... then again im 16 so i think ill settle with my jeep for now ill pay it off and spend money on a lift later down the line... but wat kind of lift u get?

1992-1998 Jeep Grand Cherokee - 3.5" Suspension Lift Kit (EZ-Ride) - Jeep Grand Cherokee Lift Kits

Check this deal out. 3.5 for under 600. damn good deal.:huh:

Link to comment
Share on other sites

  • 2 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By HSTAR
      Hey I have a 1997 big bear 350 4x4
      I replaced the shifter shaft and the shift arm linkage and the rod when I installed them all I was unaware that you had to line the dot on the shifter shaft with the gap on the linkage arm gap put it all back  together and rode it I can't get it to shift in the right gears  I can move the shift cam by hand and goes in different gears but with the shifter shaft in it riding I can't put it in R or N 
      Anyone know how to line up the shifter shaft and the shift cam s
       
    • By Mhatayas
      My uncle bought a Baja 250, 2006. Knew there was no spark since the get go. He don't know anything about quads so is getting me to help him try to get it running...
       
      battery is bad so I connected battery charger to it to crank it over , cranks over well , but no spark .... 
      Lights and everything work fine , but with each crank over using the e start switch , the display reads 999 888 777 666 ... Right down to 000 and repeats itself . 
       
      He managed to get a parts bike , I changed over the CDI and the coil and the stator from the parts bike and there was another black box by the voltage regulator I changed over ... I used my multimeter to confirm as much as I could works , it's hard without knowing which wires are which , and I cannot find any diagrams online for this bike ? 
       
      Do you think it could be the Killswitch? There's so many wires coming from there I don't know where to start . Also I should mention it appears the fan on the front of the bike has been taken off (the wires have been cut too ) 
       
      If this bike sparked it would run . The previous owner said he parked it one day and it just wouldn't start after.
    • By John Sinclair
      I WANTED TO UPGRADE THE CARBURATOR ON MY 1992 BIG BEAR 350, SO I ORDERED A NEW CARB FROM EBAY.  ACCORDING TO THE WRITE-UP IT WAS A GOOD FIT FOR BIG BEARS FROM 1988 TO 1996.  WHEN I REMOVED MY ORIGINAL CARB I NOTICED THAT IT WAS DIFFERENT FROM THE NEW CARB MY CARB HAD TWO THROTTLE  CABLES THE NEW CARB ONLY HAD ONE CABLE.  HOW CAN I MAKE THIS CARB WORK ON MY TWO CABLE THROTTLE?  
    • By Clydaho
      2022 Sector 550, 414 miles on it and the gas gauge reads empty.  I topped off the gas and it didn't change.
      There is no fuse that I could find.  No access at the gauge cluster.
      Wiring on the top of the tank looks good, properly connected.
      Could the sending unit in the tank be stuck or broken?
      Has anybody removed the tank lid?  Any tricks?  
      Any other ideas?
      Thanks for any help,
      Clyde
    • By ethie
      Hi All
      I have a 2012 Coleman 500 Outfitter that keeps fouling out the plug within 10-15 minutes 
      not sure where to start
×
×
  • Create New...