Quantcast
Jump to content

Ajmboy

Moderators
  • Posts

    6,288
  • Joined

  • Last visited

  • Days Won

    157

Everything posted by Ajmboy

  1. Welcome to QUADCRAZY 😛 I moved your topic into our Yamaha forum and added the year into your topic title. I used to have an older warrior 350 back in the day. So what actually happens, it cranks but never fires up? Start button work and engaging the starter? Use the website search feature at the top and you'll find similar topics like:
  2. They should be under the seat in most cases. I'm leaning on a faulty ignition switch but without testing, it's hard to say. Looking at wiring diagram from the manual, you don't have an optional alarm unit do you? Here's the manual
  3. Did you try adjusting it like in this post:
  4. Did you change the oil recently? The oil needs to have specific additives for it to work.
  5. That's good news 👍
  6. Ajmboy

    My Ride !!

    Great shot!
  7. Ajmboy

    silver lake

    This is a cool photo where you have just the atv in red. Just browsing and saw this photo 👍
  8. So when you shut off the key the power doesn't get cut off? Sounds like a faulty ignition switch.
  9. Another great video! I corrected the embed within the post. Basically I opened your video in youtube by clicking on your link and then just copied the url in the browser into your post and it automatically embedded. If its not embedding for you, try pasting the url again or copy the exact youtube url. 😉
  10. That came out really good and looks great! Congrats on the new outlander! * Topic moved to ATV modifications and edited title to "Can-Am 2-up seat conversion to my Honda Rancher"
  11. @Ryan Murphy when you put in in gear. The light doesn't come on but it''s in gear and the ATV works fine? Just the indicator light is not showing up? I believe there is a neutral safety gear position sensor. I found this on ebay:
  12. I do the same and have been using the valvoline atv and motorcycle oil. BUt my quad is an older 2004 if I get a new one down the road, I'll start it off with synthetic.
  13. @GrizzlyRider I've seen the rebuild kits on Amazon.
  14. I was at a Home Depot the other day and they had two of these Vector 500 UTV models outside. I guess Home Depot is selling utility vehicles now. On their website they show the Vector 250, 500, and 700 models. https://www.homedepot.com/p/Vector-500-4WD-500cc-Utility-Vehicle-HDVector500GRE/300998848
  15. Isn't the lever on the right side a hand brake?
  16. I think you would visibly see if there was gear damage. Are there any metal shavings in the oil? Check out this topic: Have you done a spline inspection? Check out this video:
  17. Are those aftermarket lights led or just upgraded bulbs with higher output? Have you tested your stator output and voltage regulator? I
  18. Does this quad have the shift levers in front of the seat?
  19. Have you checked ebay? SUZUKI 1983-1984 LT125 REAR WHEEL INNER RIM
  20. Check out these topics and check to see if there is a service manual in the yamaha service manual downloads:
  21. So this quad has a clutch? Existing hand brake is on the right side and clutch on the left? There is no way to add an aftermarket hand brake system. The hand brake engages the brakes via cable on most Chinese quads. The way it came from the factory is the way it is. I'm assuming your ITV station is some sort of inspection station? Can you take a picture of your quad and post it so we can see the hand brake setup and overall handle bars?
  22. That stinks! Keep posting the vids, they are great!
  23. @mikeexplorer Sounds like a fun time! Is that the group that you were with? That's a lot of people.
  24. Great video, looks like lots of fun! You almost need a snorkel on your quads....I like the part where the guy is waste deep in mud water!
×
×
  • Create New...