Quantcast
Jump to content

Ajmboy

Moderators
  • Posts

    6,285
  • Joined

  • Last visited

  • Days Won

    157

Everything posted by Ajmboy

  1. What year is it? Have you tested all your points and verified that there is no spark at the plug itself? Topic moved to Yamaha ATV forum and topic title changed to Yamaha 250 Bear Tracker No Spark 😎
  2. I don't think its adjustable without a special tool and the question is why is it low. I would try and clean the throttle body and check the throttle cable and make sure there is no dirt hanging it up. What year is it? Topic title changed to: Polaris Sportsman 800 EFI Low Idle
  3. Have you checked for spark and there's no spark? I always think spark, fuel, and then timing.
  4. Nice, sounds like you got a good deal!
  5. That's very innovative @mikeexplorer ! Congrats @4x4ldy !
  6. @DaveInME Those are some beautiful photos but the snow is a tough one! The only way to escape that is to go south. I'm in lower NY and the trail riding is limited. I hear out west is the place to go for riding, wilderness, etc.
  7. it should be...lol
  8. Welcome to QUADCRAZY!
  9. @DaveInME that's a good call out about width. 👍
  10. Was that hub or axle ever replaced before? Sounds like it wasn't tight enough. That's the only thing I can think of that would cause this.
  11. @Shane Stump I merged your new topic with this one since it seemed like a continuation. 😉
  12. I was thinking about doing something like that with my plow and winch, I'm assuming that's your warn winch lifting the plow? I'm still using my snowport plow and love it because it's just plow, back up and plow again. I also have a regular plow setup but went back to the snowsport for ease. was thinking of welding a bar across and having a roller on it to run the winch rope over to lift as needed.. Can you post how the front and setup looks like of what you have here? This is my plow i wrote a review on years ago. You might be able to write something up and contact @Admin to post as an article if you are going to sell this setup.
  13. Congrats on the quad! Kawasakis are good machines.
  14. That's a good suggestion by @karow1972 but does it sound like an engine chatter or something Iike exhaust or something else rattling around?
  15. The search is keyword driven and will pull up content from all areas of the site, but you can also do advance search and filter out some of the results. For parts, i usually check online at varous aftermarket source such as rocky mountain atv, bikebandit, and motosport. I also check amazon. 😉
  16. Welcome aboard @SirMaxwell
  17. Hello @wolfrider I moved your topic into the Northeast regional forum. Sounds like fun on an RZR! There are a few Maine topics https://www.quadcrazy.com/search/?q=maine you can check out!
  18. Hi @austinC I moved your topic to the Polaris UTV forum and added the full UTV info and issue, so hopefully you get some help with this. So just so I understand, it starts fine and idle, but when you give it gas it bogs down? If so, sounds like a fuel starvation issue.
  19. Yeah I would get it fixed, fuel leaks are dangerous! * Added ATV info into topic title.
  20. Sounds like you have wires incorrectly connected at the starter if it's automatically getting power to engage. * Added issue to topic title.
  21. First thought is that you had the terminals reversed and the second thought is the motor is seized on the pump sprayer. I used to have a 450 kodiak and loved it!
  22. @Westrom Great to hear that you have it running! Good luck with it and don't be a stranger!
  23. I renamed your topic a bit to 1993 Kawasaki bayou 400 help been sitting in barn Congrats on getting this ATV. Here are a couple of the service manuals on the 300 and 400 that might help you. The other thing that I've done is look up the parts I need on one of the aftermarket online websites and find the OE part number on both ATVs to see if they match, then you know they are the same and can look on "fleabay" (very funny BTW) for used parts.
×
×
  • Create New...