Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

bkolbusz

I'm New to the Quad Game

Recommended Posts

Just purchased a Arctic Cat 700 2-up. Any pointers, tips or locations to ride in SE Michigan would be appreciated.

Share this post


Link to post
Share on other sites


not sure how new u r but, b safe, ride smart, respect the lands u ride on, and set the example.

cheers,

Share this post


Link to post
Share on other sites

Welcome to the site & the fun of quads. Here in Georgia the motorcycle shops give out copies of riding places the down fall is there paid parks and some don't cater to atv's as much as motorcyces on the good side the trails are rated for your skill level. I would think about every state would have the parks. U can find them on the internet. Try to find a few people you can ride with if u are new as a new born baby to atv's u don't want to get out riding and get hurt or stuck and have nobody around to help u. As willypop said have respect for where u ride & respect that quad and it' power. Be safe!

Share this post


Link to post
Share on other sites


i am from mid-michigan and your best riding is to be either the rose city,st. helen,or the hale systems,the only places down your way,maybe bundy hill by jackson,or the mounds in mt. morris,it just depends on what u ride also,if u need any info about some the great trail systems in northern,let me know,and welcome to the site.

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Ajmboy
      Got my Yamaha Grizzly buttoned up finally and went for a quick 2 hour ride in the power lines with my neighbor, who has a Yamaha Kodiak. We have access from his yard, which is nice. Was a beautiful day today to get out and will try to go more often. Ran into two other quad riders with a sportsman and I think grizzly. Also ran into a dirt bike rider. 😎




       
    • By cheatmaster300
      I purchased a quad with engine problems. The previous owner had pulled the motor and pulled the valve cover but decided to stop. I have done Arctic Cat top ends before but have never worked on the bottom end so any advise would be appreciated. What I have found so far is the connecting rod bearing is completely gone and some scoring on the jug walls. What i'm wondering is if anybody here has worked on these and if so did you replace all the bearings or just the ones that were for sure bad? Also is the 2006 Suzuki King Quad 700 motor exactly the same? It seems Suzuki parts are a lot cheaper to buy.
    • By Susan Makowski-DeGraw
      My quad runs,  it starts up runs for about 10 minutes and then it dies if you let it sit for 10 minutes it’ll start back up ride for another 10 minutes and then die again, trying to figure out why it keeps stalling
       
       
    • By Gilbey
      Just got 2018 Suzuki King 400 ASI, getting ready to install winch on it. Noticed the wire loom up front on top of frame to pass wires through but not quite sure where the loom comes out at. I am assuming by the battery but it is not visible........would you guys just wire direct to battery as I had on previous quad or is there a better spot to wire to? I had noticed a wire junction on top of driver rear wheel with nothing connected to it and was curious if my leads could bee run to that? May have to go to dealer to see if a mechanic there can give me some insight to this process. Thoughts and ideas greatly appreciated.
  • Similar Tagged Content

    • By Dana Hudson
      Hey everyone, hoping to get some help here... my kids 03 KTF 50 Quad has always ran great... they were riding it a couple of hours a few days ago and it died a couple of times (not normal) but started right back up. A few days later my 5 year old wanted to take it for a spin so I started it (2 pulls) and he took off.. he made it a couple hundred yards and it died and we havnt been able to start it since. I have new gas, good spark and 120 psi compression.. it will not start with starter fluid in the intake or even in the cylinder.. the fuel bowl has fuel at the carb... what am I missing? It’s driving me crazy!!
    • By oxidized_black
      tag : zukifreak
       
       
       
    • By LTZ-Zach
      So i was riding the other day and my quad randomly shut off. It started back up and ran completely fine for a little while and then it started idling terribly.
      I cleaned the carb and changed all the jets and everything except the float due to the rebuild kit not coming with one and it actually runs worse then it did before.
      It will run and idle decent now but when I give it gas it dies.
      Does anybody know what could be wrong?
      I also changed the spark plug and air filter along with the oil and oil filter.
       
    • By johnwayne
      i have a 2000 suzuki king quad lt-f300f that i picked up as a project bike. it didnt run well when it was parked outside 5 years ago. it cranked after putting fresh gas - but would not run below half throttle, i took apart the carb, cleaned debris, and re-assembled. i suspect that the pilot needle is sheared off - it never protrudes into the throttle body through the pinhole. now to get the bike to ALMOST idle, the throttle idle adjustment knob is all the way up/in. the pilot needle is turned almost all the way in/up (if i understand correct, it should nominally be out 2 1/4 turns or so). and like i said, it will ALMOST idle. floods easily, rides rough.
      wanted to hear from those more experienced than me with suzukis - and im self-taught atv repair, so dont laugh too hard if my verbiage/part names is way off. 
      facing the driver's side of the bike [US] there are three hoses on this side of the carb. without a service manual or way of knowing what was messed up before i got it, i think i have them right: front hose as a vacuum to the petcock, middle hose as vacuum to the fuel pump, rear hose as fuel line from the fuel pump. running the bike in prime position results in flooding even while riding. with all hoses disconnected from the carb, fuel slowly drips from the vacuum line connected to the petcock.
      so just my speculation is that the diaphragm in the petcock is split, and the pilot needle is broke off - causing my inability to not quite idle and the rough ride. this suzuki is hoses and cables everywhere compared to the honda ranchers and yamaha warriors i am used to. I would like to have a plan rather than: replace everything at once.
      is my speculation on the right track, or could something else be at play? say, if the compression was non-existent, would that cause non-idling? i am all ears, look forward to the input.
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...