Quantcast
Jump to content

Forum Moderator Positions Available

Admin

By Admin
in Announcements/Support

 Share

Recommended Posts

Admin

Admin

Posted
Posted

We have forum moderator positions available and are looking to bring a few people onboard and add to the current mod team, to help oversee these forums and keep them moving.

The requirements to be a moderator in these forums are:

1. You must visit and spend time looking over the forums at the very least once every 2 days by logging into this site. Once a day is preferable. An occasional missed day is fine. If you are gone or will be gone for more than 3 days, a message should be posted for our moderating team.

2. An open mind, calm attitude, mediator mentality, and complete professionalism is required.

3. You may not be a forum moderator on any other site at the same time.

More details and moderator handbook provided.

If you are interested or would like to nominate someone, please post a reply in this thread. Please include availibility, past experiences, interests, and any info that you feel would make you a good forum moderator.

Admin

Admin

Posted
  • Author
Posted
I'd be willing to step up and help out around here. I think I'd be a valueable resource and asset to the site with my wide range of knowledge and aptitude. I'm available at minimum once a day. Likely more. :wink:

PM Sent.

Raptor8 Proficient

Raptor8

Posted
Posted

Since my meds have changed and I am far more familiar with the site, you might consider giving me another chance. You gave Buck Billy a second chance right?

I am far more mellow now. If you don't want me I'll understand. paul:wink:

Admin

Admin

Posted
  • Author
Posted
Since my meds have changed and I am far more familiar with the site, you might consider giving me another chance. You gave Buck Billy a second chance right?

I am far more mellow now. If you don't want me I'll understand. paul:wink:

I am definately happy to see that you are more comfortable with the layout. Your expertise and contributions have always been great. Thanks for stepping up, we will mark you down as a candidate as with rocky_mtn_honda. :yes:

DirtDemon Veteran

DirtDemon

Posted
Posted (edited)

I definately think Raptor8 will make a good addition to the team, just my 2 cents. I'm sure the Rocky mountain man would be as well, but I don't know enough to really comment on that.

Edited by DirtDemon
rocky_mtn_honda Contributor

rocky_mtn_honda

Posted
Posted

Thanks DD, i know I havent been around much lately, but I just had twins in October, and its been a rough road through my wifes pregnancy. But things are starting to settle down a bit, and I'm no longer obligated to another site. So I'd be glad to help out.

DirtDemon Veteran

DirtDemon

Posted
Posted

Well, I am sure you would make a good addition, I am one who ceartainly understands the difficulties that life can throw at you and the time that they can consume. I know we have lost a several moderators over the last several months, we could definately use some more folks who can give good technichal advise, I know I would like to see more feedback for members who are looking for such help. If you feel that you can add some help there, I would fully suppport giving you a chance. Maybe Admin and QC will see things the same way.

Admin

Admin

Posted
  • Author
Posted
I will more than willing to do the job, Right now im a Mod at another site. I have what it takes to get the job done.

I vote myself.

Thank you, you will be added to the candidates. :yes:

DirtDemon Veteran

DirtDemon

Posted
Posted

Isn't there a rule about moderating on more than one site? If chosen, would he be expected to step down from his other moderator position? Just a question, I am not saying he shouldn't be considered. I love the avatar, I think that alone is qualification enough for a moderator spot.:biggrin:

  • 4 months later...
Admin

Admin

Posted
  • Author
Posted

Re-opening this topic. We have a couple of moderator positions available if anyone is interested. Please reply to this thread.

Current and past activity levels within the forum will be looked at when determining candidates.

MIKEL5469 Community Regular

MIKEL5469

Posted
Posted (edited)

i am interested in this position,and i am usually on here on a daily basis,i would like to know more details about this position ,thanks for the possible chance

Edited by MIKEL5469
Admin

Admin

Posted
  • Author
Posted

QUADCRAZY Moderator Guidelines

A few main things that we expect from our moderating team:

1. Make sure that no spam is posted. Move it into the Mod Lounge. Report the spammers.

2. Make sure that threads are in the correct forum, move them if they are not. Ensure thread titles are descriptive.

3. Rename thread titles (manufacturer forums specifically) to add more detail if needed, to enhance searches. Make sure full atv info is posted.

4. Add threads, posts, and content to stimulate a thread if needed. Start new threads and help existing threads move along.

5. When moving threads - please choose expiring redirect (pick 2 weeks), this will reduce clutter and give enough time for that thread to be found.

6. Before deleting threads - Unless a thread is a complete duplicate (and has no posts attached/replied), move it into the mod lounge for a second opinion.

Attendance:

We expect our moderators to log in at least once every two days. Once a day is preferable, but not realistic for most people. If you will not be here for more than 3 days, you should notify us. Absence for more than a week with no notice, will result in your removal from the position without notice. You may be reinstated by staff but no promises. No notice will be given, you will be replaced.

* We reserve the right to make exceptions.

Admin

Admin

Posted
  • Author
Posted
I pretty much understand whats involved being a mod ! :yes: My computer skills might be lacking abit :laugh:But I would be willing to learn

PM sent. :wink:

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Similar Forum Topics

    • mehim
      NSFW / Looking for fun ideas for our 2nd Quad Runners event at our nudist campground
      By mehim
      Hi everyone and thanks for reading. 
      My husband and me are getting ready to host the 2nd Quad Runners event at our nudist campground. The first one (last year) went pretty well with about 20 quads attending and have to say, it was a smaller group, but they made up for their size with the large interest in partying and there was plenty of nudity as the Saturday night went on. 
      We have decided to host another one this summer, but we are looking for some fun (but safe) riding events. Our grounds are almost all flat and remember we are a nudist campground so many of us are bare as* naked so "slow ride" events would be the best. 
      Give us your thoughts and ideas and feel free to ask us anything you would like, and we will answer right here in the thread. 
      Thanks for your help and ride safe. 
      BTW, let us know what "anything goes" means for this thread section. 

    • logray
      Looking for Quadrunner Flywheel Starter Clutch Gear race diameter
      By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

    • Mikey509
      First time quad owner looking for advice!
      By Mikey509
      Hi guys, I was given a 2000 Honda Recon fourtrax 250 (I think that's the full name lol). The previous owner had it sitting for a while before I got it. It sat for another few years in my ownership. I got it up and going on its first test drive today!! I was wondering where everyone buys their parts from?  Coming from the car community, we have sites like RockAuto and many more. Anything like that for quads? Also would like to be pointed in a direction, if possible, for plastics. I am missing a few and would like to have it complete. I appreciate any input!
    • ebertz28
      Looking to buy
      By ebertz28
      Looking at 2 quads and need help deciding. #1 is a 2021 CF Moto 600 Touring with 69 miles, 2 seater with factory installed plow, windshield, backrest and luggage box with no warranty remaining  for $6500 or #2 2022 CF Moto 500 with 15 miles and a 2 year warranty for $6000?
    • smipha
      Looking for a manual
      By smipha
      Does anyone have a 2017 polaris ranger xp 1000 hunter edition service manual I can download? The one I have only shows things about the prop shaft for a crew model and mine in a standard. They have different shafts mine is cv not u joint.

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...