-
Do you own an ATV or UTV? Join our Forum!
Join QUADCRAZY ATV Forum today for FREE! We keep these forums clean and user friendly. All first posters will have to wait to have their content reviewed and approved. Once your first post is approved, you will no longer need to got through an approval process. To gain immediate approval and a NO ADS experience, consider subsribing to our Premium Membership.
-
Similar Topics
-
By Malaka
Need new tires for mostly plowing and running around. Found some good tires.
specs call for front 26-8-12 Rear 26-11-12
Has anyone put 27-9-12 & 27-11-12 as more of selections going up on front and taller
thanks all
-
By olddude
When I bought this ATV I noticed a slight miss between mid and high speed. Now I notice it has developed a bad cough as well as the miss. At first it was mainly when you first started, the cough that is, now even after the bike is warm. I also notice that I have an exhaust leak right behind the motor is it possible the leak and cough are related? I haven't pulled any of the plastic off yet I was just wondering what to look for once I do as it will be a big pain when I do.
-
By TSWIII
I let my ArticCat sit over the winter but before it was put in the garage it was running perfect. In taking it out this year it wouldn't start. I can start it with a charger and it will idle just fine. But it's doing something weird now. Either the display 1)won't display anything or 2) it will just display the analog speedometer but none of the digital stuff or 3) it will display all. So it was acting really sluggish when in HIGH gear and sounded like it was in low gear. So in driving it down the road and it being sluggish, I switched the ignition key to "Lights ON" and the ATV immediately picked up as though it really was in HIGH gear. Switching the ignition back to "ON" was like down shifting into LOW gear. When I came to a stop and switched from LIGHTS on to just ON the ATV completely died. After a 30 minute ride you would think it would start again but I had to jump it again to get it to start. Same issues with the ignition having to be pointed to Lights for it to run decently. Then just as I got back to home base the display showed VOLT. It acts like it's something in the ignition but not sure how that's related to the gears. I put a gas cleaner in the tank since it's been sitting but it really doesn't seem like a bad gas issue that I thought it was at first. I checked the IGN fuse but it seems fine, replaced it with the extra fuse but no joy. Anyone have any ideas?? Thanks in advanced for any help. It's much appreciated.
-
By Chriswe2009
My 2008 sportsman 500 EFI won’t show any signs of starting. I have replaced the battery, when I turn the key on…nothing, just like a dead battery? Any suggestions what could be wrong?
Thanks
-
By kodiakbigbear4004x4
U COULD WIGGLE START RELAY N GET POWER I CUT THE HARNESS TO THE RELAY N GOT THE BLUE WIRE WITH BLACK STRIPE AND BLUE WIRE WITH WHITE STRIPE CROSSED N THINK IT SHORTED SOMETHIGN CUZ I CANT GET NOW POWER NOW CANT FIND ANY BLOWN FUSES OR ANYTHING PLEASE HELP NEED DETAILED DIAGRAM OR SOME TIPS PLACES TO CHECK ALSO TRIED TO EVEN JUMP THE RELAY TO STARTER BATT HAS POWER BUT MOTOR WOULDNT MOVE BATT SHOWS 12V COULD I HAVE A BAD GROUND SOMEWHERE OR WHAT NEED ALL HELP I CAN GET PLEASE I GOT ATV FOR FREE WAS WORKIGN FINE AFTER I REPAIRED ALL THE RUSTED FRONT SUSPENSIUON BUT NOW NO POWER
I HAVE A GOOD DIGITAL MULTIMETER AND HAVE HAD SOME ELECTRICAL AND SOME ELECTRONICS IN COLLEGE NEED SOME TIPS OR DIAGRAM TO TRACE FOR BAD GROUND OR WHERE TO CHECK FOR SHOT FUSES OR RELAYS N ETC OR EVEN TO CHECK ALLY HARNESS FOR ANY PROBLEMS REALL WANT THIS THING GOING AGAIN
-
-
-
Similar Tagged Content
-
- 0 replies
- 1,318 views
-
- 0 replies
- 1,312 views
-
- 1 reply
- 2,404 views
-
- 0 replies
- 1,335 views
-
- 13 replies
- 3,992 views
-
-
Gallery Images
-
Recently Browsing 0 members
- No registered users viewing this page.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.