BAD DREAM

I was wondering if the complete headlight assembly from a 06 yfz450 would fit my 05 raptor 660r looking for a quick responses I found a set new for 25 bucks and either way dont want to pass up but was qurious.

I put on a new stater  , How would my Yamaha raptor 350 act if the starter clutch went out ??? Please help !!! There is no metal in oil . Its like when you hit the starter button nothing ? Any ideas ???
 

Hi I have a YAMAHA RAPTOR 660R 2003
I have taken of my Air filter and sprayed in my air inlet some carberator cleaner while starting it. That causes some problems. It struggles to start now. Please look at my attachedment video. 
What can I do now.? 
MOV_1402.mp4 MOV_1401.mp4

Hey Frank I posted some pictures of my stator from my Raptor660r and I need some help,here are some pics of the numbers I got from the stator the 494 is ok,that's from the white/red & white/green wires but from the white to white I was getting no reading and from the blue and red wires also no reading, so it's most likely done right?


Sent from my SM-N950U1 using Tapatalk
 

Purchased a 2008 Yamaha Raptor 250 for my son about 1 year ago and have been having problems with the starting system ever since.
Since owning for one year we have gone thru 2 starters and 2 starter gears. Now its spring 2019 and time for a third replacement. Am starting to think that we may have a more serious issue.
Upon replacing, the starter and starter gear, its starts fine, then after about 10 starts, you start to hear a bit of grinding. The grinding slowly gets worse until the teeth on the starter and the starter gear become trashed.
I've heard possible solutions from the starter clutch needing replaced to the casing for the starter gear shaft being out of spec?
I've also noticed that here is no difference or change if its in gear or not.
I just replaced the trans clutch as well.
Any suggestions?