3 wheeled KFX 700

Wiring diagram for 2007 Arctic Cat 700 EFI 4x4
 
 

2007 Arctic Cat 700 EFI 4x4 Wiring Diagram

View File 2007 Arctic Cat 700 EFI 4x4 Wiring Diagram
2007 Arctic Cat 700 EFI 4x4 Wiring Diagram
Submitter Admin Submitted 06/29/2019 Category Arctic Cat ATV  

It's time to replace the shocks and struts.  Looking for some stiffer springs than the OEM as I use this for farm work and I put heavy loads on the rear and haul small trailers frequently.  I've seen a couple aftermarket offerings that say they're 10% or so heavier duty.  Any other options for something a little stronger / stiffer?  Thanks.

The saga of the fan continues.
The Pin attempt in the fan shaft failed.  I then moved on to trying to weld the fan hub to the fan shaft.  I took it for a run the weld broke.  Now it was truly F'ed.  To recap the dealer price, they want $400 + CND for a replacement fan assembly.
I searched all sorts of after market places and no one carried one.  Ebay had some used ones but they were $120 USD + Conversion rate for something as old as what I have.  I went to Amazon and eventually settled on this.
 
amazon link
 
What I found... and was amazed... was that the fan mounted to the Suzuki fan assembly bracket.  I was prepared to manufacture my own mount conversions...  It also came with "Harpoon mounts" (nylon zip tie like things that go straight through the rad.   Anyways it mounted to the original bracket. It fit perfectly.  Cut the electrical plug off replaced it with the Suzuki... all good.  Let the quad heat up, thermo coupler kicked in the fan circuit, polarity was right... all was good....  Fan is under the circuit fuse rating.  
 
so I finally have a solid fan solution.  $34 CND vs $400+ CND