marioweldinginc

Well that wasnt so bad Sent from my SGH-T959V using Tapatalk

We are also just below sunrise highway but islip didnt order an evacuation yet. I dont think the hurricane will be bad but the flooding will be a bi*** Sent from my SGH-T959V using Tapatalk

Ty Sent from my SGH-T959V using Tapatalk

My first quad was an 86 Yamaha 200 Shaft Moto4 reverse. I was 9 years old and got it for my birthday. My father bought it still in its shipping crate and we had to put it together. Those were some cold nights! My first snowmobile was a Ski Doo. It had no engine cover and I loved watching the butterflies open up when my father would gun it. I was to young to drive it myself. The Moto4 is still running today and can still pull wheelies 100% original even rear tires

Do I have to pull the battery off when charging it on a tender?

supposed to be a cat 2 when it hits us. Also the eye of the storm is coming right for Bay Shore so ill ride around here for a lil and check out the damage.

DAMNIT DAMNIT DAMNIT GO AWAY HURRICANE Im going to St. Clair during the week then Sent from my SGH-T959V using Tapatalk

Did you guys feel it??? Mario Welding Inc Telecommunication and Utility Equipment Repairs

Yaaaay ill be waitin at the mailbox Mario Welding Inc Telecommunication and Utility Equipment Repairs

Any new info on hurricane Irene? I wanted to go riding in PA on Sunday. Think St. Clair will be affected?

When i went to pick up my riding gear, for gloves I wanted a set of black fox gloves. I found them but I didnt realize they were polarpaws. Looks like I'll have to "WINTERIZE" my 400ex now..... tire studs...heated socks....

ty a credit to bonersdotcom

^ l l I hate when I post from my company phone and forget to turn off the signature

Check all your body grounds first. Meaning take every ground off and clean them first. Check the tightness of the ground bolts. Once that is done then proceed with your troubleshooting. Guessing costs money so be 100% sure. D/L a shop manual and follow their test procedures. Mario Welding Inc Telecommunication and Utility Equipment Repairs

I found a neat product a walmart. Its a pump that screws onto gear oil bottles and pumps gearoil into stern drives on boats. It screws into regular quart oil bottles too. Great for topping off motors that need a little oil no messy funnel as it has a hose and cap. I leave the pump in the oil bottle and store it in my tow vehicle. It costs about 12 bucks in the oil section

Someone buy me a new ATV. nothing special maybe a can am 1000r but I wont be greedy Thanks

I you need synth rope in a hurry you can go to any marine store like WestMarine. I have my ropes made up by them from 3/8" x 65" to 1"x75'. I use them for repairing Verizon winch lines. Steel winch lines are not allowed by law due to electrocution hazards. When ordering winch line make sure you get "stablebraid" It wont stretch easy and doesnt try to rotate when being pulled

riding what else

a case of TNT for those stubborn trees

Now I have a new question. the rear rims on my ex are factory 9x8.0 but physically measure 9x9. the offset measures 5"outside and 4"inside. Ive measured several times in different spots. Which aftermarket size rim should I use to keep it as close to stock as possible. According to the mudthrowers wheel chart I have 9x9" rims. plus I have a 11" x 9" tire on there now. If so why are my rims marked 9x8.0 and did I measure the offset correctly? If I go with an ITP t-9 in a 9x9, the closest offset they make is 3x6 If I go with a 9x8" rim the offset is closer at 3x5 The tires on there are Maxxis RAZRs 20" x 11" x 9". The reason Im asking is RMATVMC is cheaper than the stealers here plus I would like to have an extra set of rims/tires if needed already mounted. AM I looking to much into this? If so please smack me

The ambush tires look like razrs :-) Sent from my SGH-T959V using Tapatalk

Isnt white smoke usually coolant? Dont know if car physics apply here Sent from my SGH-T959V using Tapatalk

Thank you Sent from my SGH-T959V using Tapatalk

Ok the stealer said it would be about 300 for a set of razr2 plus 50 to mount them on my rims. Good price? The hole shots where 90 a piece Sent from my SGH-T959V using Tapatalk

Hey get that out of my tailpipe Sent from my SGH-T959V using Tapatalk