Quantcast
Jump to content

Recommended Posts

Posted

I am not married yet (no duh 😂 I'm 15).  If I got married, I wouldnt want anything fancy-  probably just a band...  wouldn't take it off for anything probably simply cause I would forget that it was there lol

Posted

I can't wear one as an electrician. But I do wear mine all time. Even riding. I only take mine off to shower cause who likes soap in their ring. My wife on the other hand, doesn't wear hers because she is a paramedic.

Sent from my SM-N920V using Tapatalk

  • 1 month later...
Posted

I never word a ring when I was a mechanic, but I now wear a silicone ring all the time except on special occasions and then I put my good one on.

At one of the car dealerships I worked at a young guy got married. When he came into the shop after the honeymoon, he had on a gorgeous ring.  I told him to remove it for safety reasons, but he said "I will never take if off because it is a token of the commitment to my wife".  To make a long story short, before the week was out he accidentally grounded a wrench (which was touching his ring) between the terminals of a battery and destroyed the ring and give himself a third degree burn. 

I had a neighbor farmer who pulled the end off his finger when getting his rind caught on a through bolt on the bed of a grain truck when he jumped off the  side.

Ladies and Gentlemen, your spouse would rather you not wear the ring doing certain things than you having no finger to put it on.

 

  • Haha 1
Posted

I would suggest to the ladies to leave their engagement rings at home when  out riding . As others have mentioned  it's too easy  to lose the  stone(s) out  of engagement rings,whether you wear gloves or not. Nobody in their right mind wears  rings in the mechanical  and electrical  trades while on the  job , and nobody should wear them  when  doing anything recreationally where there is a  chance of snagging or shorting out their  ring. It's far too easy to end up  with no ring......or finger.

By all  means ,  wear your  rings  socially  but  leave them  home when  out riding or camping.

 

  • Like 1
  • 3 weeks later...
Posted
1 hour ago, lemoncap said:

I wear my piston ring on my ATV all the time:)

we should start a thread to the atvs asking if they wear they're rings when riding....  its just not fair that they can I we cant... (or maybe I should say best not to)

  • 4 months later...
Posted

Been Married since 11-12-11

Wife knew I would not where it often so we did not go crazy on it.

While at work not allowed,and at home I work a lot in the garage.

only time I where it when we go out.....and then I forget it.

  • Like 1
  • 4 months later...
Posted

I have a silicone ring that I swap out for the real deal when doing any outdoors activities, working in the garage, etc. Have had a couple close calls with ring avulsion in the past and I like all of my fingers, so silicone rings it is for me. 

 

  • 1 month later...
  • 1 month later...
Posted

Married in 74 wore it two years almost tore my finger off at work when it got caught on the top of a shelf upright when I was jumping down. Had it repaired and has been on a chain around my neck ever since lol.

  • Like 1
  • 3 weeks later...
Posted
On 8/25/2012 at 7:33 PM, marioweldinginc said:

I dont wear a wedding ring at all. It was a requirement not to wear one or any jewelry when I was working but then it became habit not to wear it. I do wear it when we go out. My wife doesnt wear one either.

I wore a titanium ring originally because it was a possibility I'd ruin another one easily by getting it squished in just tight enough places I wouldn't worry about my finger but did have to worry about a ring.

On 10/15/2012 at 7:51 PM, mxquadmom said:

When I ride I use to wear my ring but not anymore for 3 different reasons:

#1 - After 18 years of marriage taking my ring off is no biggie :cute:

#2 - The blister/calloused hand I get from riding really hurts

#3 - I always end up damaging/bending the ring if I ride long enough.

 

1) Yeah, my wife is not insecure about the wedding ring and with her metal allergies often keeps hers off unless we're going out.
2) Same if I end up swinging a hammer a bunch in a day
3) see above reply Î

On 2/24/2019 at 2:55 PM, Frank Angerano said:

Tattoo that thing on. No more worries ! 

Still keeping that in the consideration list for next tattoos on the both of us.

On 1/2/2020 at 11:51 AM, BAMFUPINYA said:

I have a silicone ring that I swap out for the real deal when doing any outdoors activities, working in the garage, etc. Have had a couple close calls with ring avulsion in the past and I like all of my fingers, so silicone rings it is for me. 

 

This is what I eventually ended up doing. The combination of my new brother in law getting a set for working on their farm and me getting a bit fat and having my original ring start to hurt I just moved entirely to the silicone rings so I keep them on a lot more often now. I also don't worry about losing it when I pull off my glove on a cold day.

  • Like 2
Posted

I only pull mine off when I forget and spray carb cleaner all over my hand and 2 minutes later my finger catches fire....because I forgot to take my ring off for the 95th time as my oldest laughs and says "I wondered how long it would take for you to pull it off THIS time"

  • Like 1
  • 5 months later...
Posted

I never wear my ring when I ride. If something happens and I have to fix something I then would need to take it off and it would get lost. Refuse to work on anything wearing a ring, have seen to many injuries with a ring getting caught or causing an arc

  • Like 1
Posted

I don't wear mine. I used to, until I lost my big diamond. Not sure if it got caught on the inside of my glove and came out and was lost or what. Replacing that diamond sure cost a pretty penny....     I am actually divorced from him now so I don't wear any of it anymore lol.

  • Like 1
Posted

I have been married for 61 years and have not worn my ring for at least 50 years due to my job.  I caught it between a car battery and ground one time and after I recovered from that I restored the ring an started wearing it again. Then I kept getting it caught in the depths of the machines I was working on and nearly lost a finger so I do not wear it. I probably should wear it on a chain around my neck!

  • Like 1
  • 2 weeks later...
  • 2 months later...
Posted

Wear mine, but it's bulky and thinking about either a thinner one or something in a different material for work and riding and the like. 

Posted

Looking for an engagement ring for the gf. However I became paranoid of metal rings since my fathers told me his buddy had the ring caught and lost his finger. No thank you now I’m trying to explain to the gf how I’ll wear a cheap o ring as my wedding band. 100 of them for a few dollars and I don’t have to worry about losing it or a finger.

  • 9 months later...
Posted

I am an industrial technician which includes electronics, mechanics, and machine work. I no longer wear my ring since I got it between an auto type battery and ground then getting it caught in machinery guts several times, and nearly pulling my finger off a couple of times.  I figured I could leave it off rather not having a finger to wear it on. It is on a chain around my neck when I am not working.

 

  • 2 weeks later...
  • 2 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Forum Topics

    • By quadnut20
      23 friends 5 days great weather in Wyoming riding Sand Dunes & trails !!











    • By LMI
      Hi all.  New to the forum & quads.  Seems like a great place full of info.
      I just recently picked up a 2005 Suzuki KingQuad LTA700.  I need a battery.  I've been reading up on conventional vs AGM types.  I have a Royal Distributing and Canadian Tire.  RD has 2 types avail for my year/Model a battery YTX16-BS CRANK $75, and BATTERY YTX20CH-BS YUASA $140.  Neither of these is the type from the manual FTZ16-BS.
      from what I can tell... I think the only difference is the capacity with the $75 unit rated at 14 AH/10HR and the $140 unit rated at 18 AH/10HR ... which is the rating in the manual for the FTZ16-BS.  How much does this make a difference for nearly x2 the cost?
      And about the models/type numbers.... what is important to know ... they all end in "-BS" but are the other details relevant or just manufacturer naming?
    • By quadcrazy
      Mud riding is one of the most popular forms of ATV riding, but the wrong tires can leave you stuck fast in deep ruts and swampy trails. Choosing the best ATV tires for mud can dramatically improve traction, steering control, flotation, and overall off-road performance.
      Whether you ride trails, mud parks, swamps, or backwoods terrain, this guide covers some of the top ATV mud tires available today and what makes them stand out.
      What Makes a Good Mud ATV Tire?
      Mud tires are designed with aggressive tread patterns and deep lugs that help clean out thick mud while maintaining traction. The best mud tires usually feature:
      Deep tread lugs Wide spacing for self-cleaning Strong sidewalls Taller tire sizes for added clearance Durable construction for rough terrain 1. Maxxis Zilla

      The Maxxis Zilla is one of the most popular ATV mud tires because it balances mud performance with trail comfort. It is lightweight, aggressive, and performs well in a variety of terrain conditions.
      Why Riders Like It
      Excellent mud clean-out Lightweight design Smooth trail ride Available in many ATV sizes Best For: Trail riders who also spend time in mud.
      2. ITP Cryptid

      The ITP Cryptid is designed for serious mud riding with deep tread lugs and strong sidewall construction. It provides excellent traction in deep mud while remaining durable on rough trails.
      Features
      Deep aggressive tread 6-ply durability Strong side bite traction Great for lifted ATVs Best For: Deep mud and swamp riding.
      3. Outlaw 2 ATV Tires

      The Outlaw 2 has become a favorite among hardcore mud riders thanks to its massive lugs and impressive pulling power in thick mud.
      Pros
      Extreme mud traction Large tread design Excellent forward bite Popular in mud parks Cons
      Rougher ride on trails Heavier than trail-oriented tires Best For: Dedicated mud machines and mud bogs.
      4. STI Out & Back Max

      The STI Out & Back Max offers a solid balance between aggressive mud performance and everyday trail comfort.
      Highlights
      Durable sidewalls Great traction in loose terrain Smooth handling Long tread life Best For: Utility ATVs and hunting machines.
      5. SuperATV Assassinator

      The Assassinator is built for extreme mud riding and features huge paddle-style lugs capable of digging through the nastiest swamp conditions.
      Features
      Massive tread depths Extreme mud traction Available in oversized setups Designed for hardcore mud riders Best For: Extreme mud builds and dedicated swamp riders.
      Choosing the Right Mud Tire Size
      25-27 Inch Tires
      Great for stock ATVs Less drivetrain strain Better acceleration 28-30 Inch Tires
      Balanced performance More ground clearance Popular for trail mud riding 32+ Inch Tires
      Maximum mud performance Best for lifted ATVs Ideal for deep swamp riding Larger tires may require clutch upgrades, lift kits, or gear reductions depending on your ATV.
      Bias vs Radial Mud Tires
      Bias Ply Tires
      Stronger sidewalls Better puncture resistance Popular for aggressive mud riding Radial Tires
      Smoother ride quality Improved handling Better trail comfort Most serious mud riders prefer bias-ply tires because of their durability in harsh terrain.
      ATV Mud Tire Maintenance Tips
      Wash mud off after every ride Check tire pressure regularly Inspect sidewalls for damage Rotate tires periodically Avoid excessive pavement riding Lower tire pressure can improve mud traction, but beadlock wheels are recommended for very low PSI setups.
      Final Thoughts
      The best ATV tires for mud depend on your riding style and terrain conditions. Riders who split time between trails and mud often prefer versatile tires like the Maxxis Zilla, while hardcore mud riders typically choose aggressive options like the Outlaw 2 or Assassinator.
      Before upgrading to oversized mud tires, make sure your ATV can handle the added weight and drivetrain stress. Proper setup can dramatically improve your ATV’s performance in deep mud and swamp terrain.
      Visit QUADCRAZY ATV Forum for ATV tire reviews, mud riding discussions, builds, and technical advice from fellow riders.

      View full post
    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By TomJulio
      Looking for two stock front wheels for 92 TRX300 2WD.   I think they are 6 x11" size.     
×
×
  • Create New...