Quantcast
Jump to content

marioweldinginc

Members
 View Profile  See their activity

  • Posts

    2,065

  • Joined

  • Last visited

 Content Type 

Everything posted by marioweldinginc

  1. marioweldinginc
    If i dont get my motor back I just might have to buy another EX Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  2. marioweldinginc
    Ya know there was quite a few Renegade 800 and a 1000. Though they sounded awesome with the Muzzy exhaust, i wasnt that impressed with their trail ability. The the 750cc up atvs all held their own and the Renegade had no clear advantage over the others. This is all my opinion. Please understand that Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  3. marioweldinginc
    I think the housing is part of the intake. Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  4. marioweldinginc
    Agreed. Most cooling systems max out at 15-18 psi. The jb weld was a last resort. Most of the time with a steady hand and patience the bolt can be removed. I couldnt see from the pic what meat was around the thermo housing so i stayed away from going up in size. If there is plenty of meat around and you.screw up the hole you can go up in size. But make sure not to go into the water jackets! Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  5. marioweldinginc
    HAHAHAHAHAHAHA no seriously HAHAHAHAAHAHA I probably will end up getting a yfz for my next sport quad. Though if i ever do get a utility it would have to be a Brute Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  6. marioweldinginc
    The Yammy was quite impressive. We set up a.drag race and i was paired up with a 650cc machine. We were neck and neck till the end when i pulled ahead. BUT id rather be shiftin gears and hangin sideways!! Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  7. marioweldinginc
    If you have no access to a torch. Center punch the ezout and with a new drill bit (no home depot bit either) slowly!! drill the ezout. use a sh** load of cutting oil or used engine oil on the bit. If you elongate the bolt hole use some jb weld to make a bolt hole then when it sets after 24 hours you can drill and tap the jb weld Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  8. marioweldinginc
    If you have access to a torch with a small tip, you can heat the ez out. When you heat it up almost white/red and let it AIR cool down (NO WATER!!!!!) the ez out will get soft enough to center punch and drill. When u attempt to remove the original broken bolt heat up the intake or head if its cast till its cherry red. Then use the ezout or reverse hand drill bit or just drill it and tap. Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  9. marioweldinginc
    Welcome to Quad Crazy!! Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  10. marioweldinginc
    Welcome to QC! Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  11. marioweldinginc
    The Grizzly was my ride for the day. Thanks Mark! **Update the ride is still going into the night*** Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  12. marioweldinginc
    V-Force John is having a ride out of Barnesville PA. at 9:00am on Saturday( tomorrow) Parking is at his shop and the trail entrance is behind there. Bring lunch and a gas can. No entry fee nor permit needed. As of now 100+ riders will be there. approx 6 hour ride. Google VFJ coal run or go to kawasaki forum for more info. Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  13. marioweldinginc
    Welcome to the QC family!! Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  14. marioweldinginc
    Try putting in a teaspoon of gas in the sparkplug hole and try to start. I know kdirtbikes sometimes tend to flood easy when you try to kick them over Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  15. marioweldinginc
    Cool picture of me and my dad
    Excellent pic !
  16. marioweldinginc
    what year 200x? I thought you meant a Honda 200x trike lol
  17. marioweldinginc
    Probably a bad batch of master links. Not every link is perfect but within an acceptable level. Welcome to the world of machining. :-) Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  18. marioweldinginc
    Im positive that my motor is at 4 stroke tech! Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  19. marioweldinginc
    Try a second dose of seafoam. Maybe its still gummed up Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  20. marioweldinginc
    Take off the air tube and see if carb is squirting fuel into motor. To test spark you would need a spark gap tester. Without it the spark should be white/blue in color. Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  21. marioweldinginc
    Get a lith- ion battery for your bike. They arent cheap but they hold alot more ah/hr than wet plate batteries. Plus they trickle down far less when not used. One of my next upgrades!
  22. marioweldinginc
    Ive done a few monster jumps that i thought were the end of me and came out fine. I also was knocked off my bike going no faster that a slow jog so ya never know Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  23. marioweldinginc
    Excellent. I will definetly try some. Coal dust is hard to get off a quad Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  24. marioweldinginc
    Voted ... Yeah baby #1 Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  25. marioweldinginc
    Ah Im just kidding... Or am I.... Lol.. Maybe im not lol... Sent from my SGH-T959V using Xparent Blue Tapatalk 2

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...