Quantcast
Jump to content

oxidized_black

Members
 View Profile  See their activity

  • Posts

    10,696

  • Joined

  • Last visited

  • Days Won

    38

 Content Type 

Everything posted by oxidized_black

  1. oxidized_black
    Good Morning QC !!
  2. oxidized_black
    Top 100 ORV Sites - Home voted .... 276
  3. oxidized_black
    there are lots of stock heads on ebay if you just want to get it going ...
  4. oxidized_black
    i hear ya on that !! it was really warm here for 4-5 days, but it got cold and started snowing again ...
  5. oxidized_black
    a bad ground usually does that ... dam, thats not good news replacing another one ... check all the grounds ... battery, cdi, just go thru everything and sand areas that connect to the frame, and clean connectors as best you can and dielectric grease it all checking all the wiring you may discover a short somewhere too, around the neck of the handlebars, under the fuel tank and seat on the frame rail ... where ever you see wearing on the protective covering, peel it back and look, electrical tape to repair ...
  6. oxidized_black
    the 350s and 400s are the same block, the 400 has a longer stroke. i would assume yamaha didnt change the motor mounts, but dont quote me ... looking on the parts list, a kodiak in the year 1996 to 1998 uses the same frame, the 350s used a different frame ... i would say take some measurements and cross your fingers. the connectors will probably be different from different years/bikes too ... im sure you will run into a few mods you have to do along the way ...
  7. oxidized_black
    i sent you mail here with my email ...
  8. oxidized_black
    another thing you could do, is upload it to youtube, and copy & paste the link back in the chatbox. i have had to do that befor because the video was too large for the forum ...
  9. oxidized_black
    when you want to post a picture or video from your phone or computer, below this chat box, click "go advanced" and when the screen refreshes, type your message and click the paperclip icon to attach photos or videos ...
  10. oxidized_black
    do a good read so you know what youre up against ... make a plan of attack ... take your time ... 1990 -1998 Yamaha Warrior YFM 350 Service Manual.pdf
  11. oxidized_black
    Good Morning QC !!
  12. oxidized_black
    Top 100 ORV Sites - Home voted .... 273
  13. oxidized_black
    awesome !! i am out today with the Big Bear in the alley, ripping up and down LOL
  14. oxidized_black
    it is probably something to do with the clutch/shift fork bent, or stuck, or the guide ...
  15. oxidized_black
    i would do it with the key on ...
  16. oxidized_black
    here is the manual ... https://www.hightail.com/download/elNKOGNUSEJwcFY3czhUQw
  17. oxidized_black
    have you checked the switch in the cover to see if it actually works , the one with the 2 wire plug it is a normally closed switch so all you need to do is unplug it at the connector, and use a 0hm meter to see if you have continuity (resistance) between the 2 wires. a video from youtube about resetting the belt ... [ame=http://www.youtube.com/watch?v=igmOYPv5KXo]KAWASAKI 360 PRAIRIE BELT RESET - YouTube[/ame]
  18. oxidized_black
    Top 100 ORV Sites - Home voted .... 271
  19. oxidized_black
    Good Morning QC !!
  20. oxidized_black
    i love hondas ... they are very nice, bulletproof if you will ... it will be alot slower than the warrior, but there will be no where you cant get to ...
  21. oxidized_black
    drats !! well, i think you have to get a plan of attack together and get inside the case ... take your time and taking pictures isnt a bad idea ...
  22. oxidized_black
    have you checked the cable? i have read where if they are at the end and stretched, it is hard shifting too ...
  23. oxidized_black
    everything is easy if you have confidence, but yes, if you know your way around the garage i think you could pacify yourself for a day ... i really dont think it is all that difficult ...
  24. oxidized_black
    im not sure if thats the case, i know my big bear i can leave it in gear, and it has another shifter for the forward and reverse ... im not sure the set-up on the warriors ...
  25. oxidized_black
    i think when a bike has a hard time shifting between gears, 9 times out of 10 it is a bent or damaged clutch fork ... if you need a manual, go here ... http://www.quadcrazy.com/atvforum/yamaha-atv-forum/9571-2001-yamaha-warrior-350-wont-fire.html#post89266

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...