Quantcast
Jump to content

oxidized_black

Members
  • Posts

    10,696
  • Joined

  • Last visited

  • Days Won

    38

Everything posted by oxidized_black

  1. there should be 3-4 inches i would say ... i had that much when i had a plow with basically the same rigging set-up you have. the guy may have put more pressure in the tires thinking it might give him more clearence ... Bercomac 48.pdf
  2. some do and some dont ... looks like you need one to keep it going ...
  3. Very Nice !!
  4. I have never had a sport quad, but everyone says the 400ex is the way to go ...
  5. I bet that's the view your riding buddies see the most
  6. Looks like a lot of fun !!
  7. [ame=http://www.youtube.com/watch?v=gaXX09W-ySI]2014 ARCTIC CAT SXS SPORT: INTRO - YouTube[/ame]
  8. [ame=http://www.youtube.com/watch?v=Vou06vXqR2s]Wildcat Porsche Crusher - YouTube[/ame]
  9. i would sand the connections bare again at the solenoid and cables, even running to the starter. it may end up the same thing if your battery is no good, but be right when you replace it. the carb i would run some seafoam through the tank and that might eliminate tearing the carb apart to clean it ...
  10. did you click the underlined link? it worked for me just now again ... ???
  11. Top 100 ORV Sites - Home site is back up, voted ....
  12. yes, the 280 is the 300 ...
  13. i have the service manual, wasnt able to find an owners ... https://www.hightail.com/download/elNKTXRlK3hPSHlGa2NUQw
  14. I will look when i get back today, sorry, i assumed it was polaris ... my bad
  15. owners manual ... http://www.polaris.com/en-us/company/parts-manuals/partsmanuals/9922732r01.pdf http://s3.amazonaws.com/szmanuals/f7686208381cfd17790514dbee4e7362 http://data.manualslib.com/pdf/14/1315/131461-polaris/sportsman_550_efi.pdf?149689fc410a630135bf589dcc44b3e8
  16. the set-up is probably ok, but the driveway, (if gravel) may have to be frozen. perhaps the guy that had it before had a paved driveway or did it while the driveway was frozen. i looked on the site, and it looks like a terrific unit !! if you never got a manual for it, go here Products - Manual / Parts List - BERCO Accessories for garden tractors and lawn, snowblower for ATV and UTV it may offer some tips too ...
  17. it would be good to know the vacuum isnt cutting the fuel off and on first before a carb rebuild ,,,
  18. i think you are ok with the copper brush, i would use some rtv blue or black gasket maker along with the gasket you are getting. i would tend to use some carb cleaner or brake cleaner in an aerosol so it cleans and dries quickly ...
  19. hello and welcome to the site. there is also a big bear manual in the yamaha section here ... http://www.quadcrazy.com/atvforum/yamaha-atv-forum/11168-yamaha-atv-service-manuals.html ... post #3. im sure someone will help you out if you get into problems
  20. i have always run a hotter plug in the Canadian winters ... if you use ngk, go down 1 number for the hotter plug, but remember to change it out when the warmer weather hits ...
  21. it could be time for a rebuild on the carb, if you do take it apart, check the needle and seat at the float. i would soak the carb and blow it out with air too ... check and make sure all the vacuum lines are clear ... does this bike have the electric fuel pump?
  22. if you dont want to tear the carb apart as a last resort, try putting seafoam cleaner in the tank and running it through, sounds like something is gummed up maybe ...
  23. Good Morning/Afternoon QC !!
×
×
  • Create New...