Quantcast
Jump to content

marioweldinginc

Members
 View Profile  See their activity

  • Posts

    2,065

  • Joined

  • Last visited

 Content Type 

Everything posted by marioweldinginc

  1. marioweldinginc
    Im not sure if the 300ex is the same as the 400ex but when i did changed my rear pads to ebc they kept getting hung up on the caliper and i couldnt seperate them wide enough to get them over the rotor. Eventually Saturns moons aligned with Venus and the pads mysteriously fell into place. Not sure how but when all was together there was about a 1/16" of space on each side of the rotor till i used the brake. I still dont know what happened Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  2. marioweldinginc
    Most atvs have a parking brake delete mod because the park brake sometimes doesnt release fully and causes drag. Even though the service brake and park brake are to different systems they both use the rear caliper to hold the atv in place. Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  3. marioweldinginc
    I use EBC sintered on my ex. They grab hard even when in water but seem to wear a little to fast for me Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  4. marioweldinginc
    Woops didnt see Oxyz link nevermind :-) Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  5. marioweldinginc
    Oversized self tapping drain plugs. Available at most auto stores Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  6. marioweldinginc
    Congrats! Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  7. marioweldinginc
    I didnt even notice lol! Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  8. marioweldinginc
    Welcome to QC !! Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  9. marioweldinginc
    Follow the positive battery cable for an inline fuse. Maybe it blew Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  10. marioweldinginc
    Aww Can Am yellow Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  11. marioweldinginc
    Excellent pics! Glad to hear it was a great ride! Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  12. marioweldinginc
    Agreed simple yet effective Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  13. marioweldinginc
    Agreed showing 12v doesnt guarantee it has the cranking power to turn the engine over. Have the battery tested. While your at it check your grounds. Dont look at em take them off and sandpaper the metal underneath Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  14. marioweldinginc
    Welcome to QC fellow Honda fan :-) Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  15. marioweldinginc
    I have the harbor freight tri-fold ramps i think they were 60-70 bux great ramp but a little bulky. I would plunk down the extra coin for the aluminum tri folds. They also have a three across ramp thats aluminum too. Works for trikes Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  16. marioweldinginc
    Angry Bird
    I wanna see what it looks like assembled. That might be the final attempt lol
  17. marioweldinginc
    Im *positive*that life sucks Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  18. marioweldinginc
    Voted... Doesnt seem to move Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  19. marioweldinginc
    We all dont have the Rappy Force to protect us and sometimes we go a little too far. Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  20. marioweldinginc
    Ya gotta learn how to wheelie suburbia style :-) Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  21. marioweldinginc
    [ame] [/ame] This guu is quite good!! With a little practice this could be Ninasatv Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  22. marioweldinginc
    Yeah the only thing that sucks about small shops is the turn around time. He has answered all my questions truthfully and keeps me informed as to what step he is on the motor. Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  23. marioweldinginc
    I tried pressing them out with a 20 ton press with no luck. I heated them in the oven at 350° for 20 min and popped the bearings out with a drift punch and hammer with very little force. There is a machined lip on the inside of the hub preventing the bearings from being pressed out Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  24. marioweldinginc
    It came in! Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  25. marioweldinginc
    Imma gunna try that Sent from my SGH-T959V using Xparent Blue Tapatalk 2

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...