Quantcast
Jump to content

oxidized_black

Members
  • Posts

    10,696
  • Joined

  • Last visited

  • Days Won

    38

Everything posted by oxidized_black

  1. i can help you out with a manual ... https://www.yousendit.com/download/WUJaUXV1UzdlcEt4djlVag
  2. here's the service manual ... https://www.yousendit.com/download/WUJaUXV1UzdTRTRLSk1UQw
  3. not sure, i usually go to the Motorcycle Parts, Motorcycle Accessories by BikeBandit.com site and compare the part numbers.
  4. it's hard for me to get into the politics, especially with all the bashing that goes on ... i really wish ross perot could have gotten in years ago when i was watching the race, that man i liked and think he could have done alot.
  5. if you can rev it high, i would spray some carb cleaner in there and see what that does. is the plunger the choke ? you may need a rebuild kit. you should check the needle and seat at the float too.
  6. i have replaced the fronts on my yamaha and it's not too too bad to do. just a matter of getting things out of the way so you can slide the axle in and out. what year is your polaris and i'll see if i have a manual. it might show a few things you never expected ...
  7. here are a couple links ... https://www.yousendit.com/download/WUJaUXVqMGNkMnVKUmNUQw https://www.yousendit.com/download/WUJaUXVqMGN3TGdFSzhUQw
  8. i'd check the fuses, i think it's an inline fuse on that bike. i'd also get a votage meter and get some readings where the current doesn't show up. you could try jumping the starter at the solenoid/starter relay. if you have a meter, you could also test the battery. a bad battery won't make everything work ...
  9. right on chris !! :cheers2c: :partyc: :cheers2c:
  10. i have been looking for quite awhile for the eiger's owner and service manuals. i'll post it as soon as i come across one, but its tough to find right now. for your mud flaps, here's a link from QC ... http://www.quadcrazy.com/atvforum/suzuki-atv-forum/11248-2001-suzuki-quadrunner-lt-500-looking-mud-flaps.html
  11. right on ! you'll have a blast with it !! welcome to QC !!
  12. from top or from bottom ?? not being a smart a$$, just a PIA ripping carbs apart ... i'd rather be rippin' beer cases
  13. yah i think you should try the cable, wasn't laughing at the revs, just tearing it apart more than me
  14. i don't have a 2000, but i have 2001. not sure of any differences if any ??? big file, 200Mb's https://www.yousendit.com/download/WUJacHBITkE5RllUWThUQw
  15. i think it's because it's actually a 280 ... https://www.yousendit.com/download/WUJaOGNhbEplcEt2eE1UQw
  16. Top 100 ORV Sites - Home voted !! ...
  17. there is a little metal tab on the needle hook up. if you tip the carb upside down and measure from the outer flange of the carb to the top of the float, should be 1/2" give or take. i had trouble with mine too, ripped it apart 8 times or more before i got it right ,,,
  18. stuck needle and seat and a carb kit will fix it ...
  19. i'm still waking up, Good Morning QC !!
  20. it should be stamped on the frame where the front skid plate attaches (maybe hard to see). there could also be a sticker where the handlebars attach to the frame ....
  21. Top 100 ORV Sites - Home kickin' a$$ with 165 votes so far ...
  22. i think it should be pretty good, maybe some suzuki guys will jump in and give their opinions ...
×
×
  • Create New...